Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/PowerEdge R200/List of Posts
Forum Topic - PowerEdge R200: (7 Items)
   
Update
dave allamby(deleted)
10/06/2009 8:09 PM
post39469
PowerEdge R200   
Trying to load QNX4.25 on too a PowerEdge R200
Fsys.atapi is crashing just after it starts loading the rest of the OS.

Dave
Hugh Brown
10/07/2009 7:43 AM
post39492
RE: PowerEdge R200   
How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
won't work. It has to be set to compatible mode. Please also supply the
'show_pci -vv' output.

Thanks, Hugh.

-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Tuesday, October 06, 2009 8:09 PM
To: qnx4-community
Subject: PowerEdge R200

Trying to load QNX4.25 on too a PowerEdge R200
Fsys.atapi is crashing just after it starts loading the rest of the OS.

Dave




_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post39469
dave allamby(deleted)
10/07/2009 9:39 AM
post39511
Re: PowerEdge R200   
Hugh,

Have to figure out how to load the QNX first...the CD-ROM drive is SATA 
too so the product suite wont boot either.
I took the drive out of Dell 860 and dropped it into new machine to 
test. Maybe I can do something in the boot image.
The BIOS only allows ATA mode.

Dave

Hugh Brown wrote:
> How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
> won't work. It has to be set to compatible mode. Please also supply the
> 'show_pci -vv' output.
>
> Thanks, Hugh.
>
> -----Original Message-----
> From: dave allamby [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, October 06, 2009 8:09 PM
> To: qnx4-community
> Subject: PowerEdge R200
>
> Trying to load QNX4.25 on too a PowerEdge R200
> Fsys.atapi is crashing just after it starts loading the rest of the OS.
>
> Dave
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39469
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39492
>
>
>
dave allamby(deleted)
10/16/2009 1:25 AM
post40090
Re: PowerEdge R200   
Hugh,

The atapi driver wont start, so dont have anyway to dump show_pci 
output....Tried creating a stripped
down .boot with Dev and Dev.ser running but the boot process does not 
seen to allow piping so cant pipe output of show_pci to serial line
...is the source for show_pci available could mod it to write directly 
to /dev/ser1

Dave


Hugh Brown wrote:
> How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
> won't work. It has to be set to compatible mode. Please also supply the
> 'show_pci -vv' output.
>
> Thanks, Hugh.
>
> -----Original Message-----
> From: dave allamby [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, October 06, 2009 8:09 PM
> To: qnx4-community
> Subject: PowerEdge R200
>
> Trying to load QNX4.25 on too a PowerEdge R200
> Fsys.atapi is crashing just after it starts loading the rest of the OS.
>
> Dave
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39469
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39492
>
>
>
Hugh Brown
10/16/2009 8:01 AM
post40102
RE: PowerEdge R200   
Do you have QNX 6.4? If so, I can send you a boot images for QNX6 to
boot from a USB stick.

Hugh.

-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Friday, October 16, 2009 1:26 AM
To: qnx4-community
Subject: Re: PowerEdge R200

Hugh,

The atapi driver wont start, so dont have anyway to dump show_pci 
output....Tried creating a stripped
down .boot with Dev and Dev.ser running but the boot process does not 
seen to allow piping so cant pipe output of show_pci to serial line
...is the source for show_pci available could mod it to write directly 
to /dev/ser1

Dave


Hugh Brown wrote:
> How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
> won't work. It has to be set to compatible mode. Please also supply
the
> 'show_pci -vv' output.
>
> Thanks, Hugh.
>
> -----Original Message-----
> From: dave allamby [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, October 06, 2009 8:09 PM
> To: qnx4-community
> Subject: PowerEdge R200
>
> Trying to load QNX4.25 on too a PowerEdge R200
> Fsys.atapi is crashing just after it starts loading the rest of the
OS.
>
> Dave
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39469
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39492
>
>
>   




_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post40090
dave allamby(deleted)
10/16/2009 12:55 PM
post40153
Re: PowerEdge R200   
Hugh

No I have not upgraded our software to QNX6 and I have no licenses for it.
I am still trying to get a moded version of show_pci to run and dump its 
output directly to the serial port.
Runs fine from command prompt but seems to halt after detecting PCI 
version when stuck in the boot file

Dave



Hugh Brown wrote:
> Do you have QNX 6.4? If so, I can send you a boot images for QNX6 to
> boot from a USB stick.
>
> Hugh.
>
> -----Original Message-----
> From: dave allamby [mailto:community-noreply@qnx.com] 
> Sent: Friday, October 16, 2009 1:26 AM
> To: qnx4-community
> Subject: Re: PowerEdge R200
>
> Hugh,
>
> The atapi driver wont start, so dont have anyway to dump show_pci 
> output....Tried creating a stripped
> down .boot with Dev and Dev.ser running but the boot process does not 
> seen to allow piping so cant pipe output of show_pci to serial line
> ...is the source for show_pci available could mod it to write directly 
> to /dev/ser1
>
> Dave
>
>
> Hugh Brown wrote:
>   
>> How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
>> won't work. It has to be set to compatible mode. Please also supply
>>     
> the
>   
>> 'show_pci -vv' output.
>>
>> Thanks, Hugh.
>>
>> -----Original Message-----
>> From: dave allamby [mailto:community-noreply@qnx.com] 
>> Sent: Tuesday, October 06, 2009 8:09 PM
>> To: qnx4-community
>> Subject: PowerEdge R200
>>
>> Trying to load QNX4.25 on too a PowerEdge R200
>> Fsys.atapi is crashing just after it starts loading the rest of the
>>     
> OS.
>   
>> Dave
>>
>>
>>
>>
>> _______________________________________________
>>
>> QNX4 Community Support
>> http://community.qnx.com/sf/go/post39469
>>
>>
>>
>>
>> _______________________________________________
>>
>> QNX4 Community Support
>> http://community.qnx.com/sf/go/post39492
>>
>>
>>   
>>     
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post40090
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post40102
>
>
>
dave allamby(deleted)
10/16/2009 6:17 AM
post40096
Re: PowerEdge R200   
Hugh,

Update, found the show_pci source

Dave
Hugh Brown wrote:
> How is the IDE interface setup in the BIOS? If it is setup as AHCI, it
> won't work. It has to be set to compatible mode. Please also supply the
> 'show_pci -vv' output.
>
> Thanks, Hugh.
>
> -----Original Message-----
> From: dave allamby [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, October 06, 2009 8:09 PM
> To: qnx4-community
> Subject: PowerEdge R200
>
> Trying to load QNX4.25 on too a PowerEdge R200
> Fsys.atapi is crashing just after it starts loading the rest of the OS.
>
> Dave
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39469
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post39492
>
>
>

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems