Freescale MPC8572 DS Board Support Package#
This BSP supports the Freescale MPC8572 DS board.
Releases#
QNX Neutrino 6.4#
QNX Neutrino 6.3.2#
Features#
Feature | Planned Availability | Format | Notes |
Ethernet | Completed | SRC | eTSEC Ethernet controller in TSEC compatibility mode |
I2C | Completed | SRC | I2C controller |
NAND | Completed | SRC | K9NBG08U5A-P (4G x 8 Bit) NAND Flash |
PCI | 10/08 | SRC | . |
PCIe | Completed | SRC | PCI Express controller |
Serial | Completed | SRC | UART devices on RS-232 port 0-1 |
SMP | 10/08 | . | . |
Startup | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
6.4 Change History#
Trunk#
- Created from QNX Neutrino 6.3.2 Freescale MPC 8572 BSP version 1.0.0
- Built using the latest 6.4 toolchain
- Added:
6.3.2 Change History#
1.0.0#
- Initial release under Apache II
- Includes:
- Ethernet
- I2C
- NAND
- PCIe
- Serial
- Startup