Freescale MPC8548 CDS Board Support Package#
This BSP supports the Freescale MPC8548 CDS board.
Releases#
QNX Neutrino Trunk#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
Latest | trunk | QNX Momentics trunk | trunk Generic Notes | here | QDL and Apache II | Experimental | QNX | Coming Soon! | Coming Soon! |
QNX Neutrino 6.4.0#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
Latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Coming Soon! | Coming Soon! |
Features#
Feature | Planned Availability | Format | Notes |
Ethernet | Completed | SRC | TSCE Ethernet controller |
Flash | Completed | SRC | 2 Banks of 8M (AMD Mirrorbit) |
PCI | Completed | SRC | PCI controller |
Serial | Completed | SRC | SCC UART devices on RS-232 port 1 and port 2 |
Startup | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC8548 CDS Trunk
QNX Neutrino 6.4.0 Change History#
Trunk#
- Created QNX Neutrino 6.4.0 BSP for Freescale MPC8548 CDS 1.0.0
- Built using the latest 6.4 toolchain