Freescale MPC8536 DS (Development System a.k.a Calamari) Board Support Package#
This BSP supports the Freescale MPC8536DS board.
Releases#
QNX Neutrino Trunk#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
latest | trunk | QNX Momentics Trunk | Trunk Generic Notes | here | QDL and Apache II | Experimental | QNX | Coming Soon | Coming Soon |
QNX Neutrino 6.4.0#
Features#
Feature | Planned Availability | Format | Notes |
Startup | Completed | SRC | . |
Serial | Completed | SRC | UART devices on RS-232 port 0-1 |
Ethernet | Completed | BIN | eTSEC Ethernet controller in TSEC compatibility mode. Source can be downloaded from Networking project. |
I2C | Completed | SRC | I2C controller |
SPI | Completed | SRC | SPI controller |
PCI | 10/08 | SRC | . |
NAND | Completed | SRC | Samsung K9NBG08U5A (32 MB) NAND Flash |
FLASH | Completed | SRC | Spansion S29GL01GP (128 MB) NOR Flash |
SD CARD | Completed | SRC | . |
USB Host | Completed | BIN | host1/host2 (EHCI) |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC8536 DS (Development System a.k.a Calamari) Trunk
QNX Neutrino 6.4.0 Change History#
Trunk#
- Created QNX Neutrino 6.4.0 BSP for Freescale MPC8536 DS (Development System a.k.a Calamari) 1.0.0
- Built using the latest 6.4 toolchain
Search Keywords: 8536, mpc8536, ds, Freescale, MPC8536, DS