Freescale MPC8349 MDS Board Support Package#
This BSP supports the Freescale MPC8349 MDS board.
Releases#
QNX Neutrino Trunk#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
latest | trunk | QNX Momentics Trunk | Trunk Generic Notes | here | QDL and Apache II | Experimental | QNX | Coming Soon | Coming Soon |
QNX Neutrino 6.4#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Coming Soon | Coming Soon |
QNX Neutrino 6.3.2#
Features#
Feature | Planned Availability | Format | Notes |
Startup | Completed | SRC | . |
Serial | Completed | SRC | UART devices on RS-232 port 0-1 |
Ethernet | Completed | SRC | eTSEC Ethernet controller in TSEC compatibility mode |
I2C | Completed | SRC | I2C controller |
PCI | Completed | SRC | . |
Flash | Completed | BIN | . |
IPL | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC8349 MDS Trunk
QNX Neutrino 6.4 Change History#
Trunk#
- Created from QNX Neutrino 6.3.2 BSP for Freescale MPC8572 DS 1.0.0
- Built using the latest 6.4.0 toolchain
- Added the TSEC Ethernet driver
QNX Neutrino 6.3.2 Change History#
1.0.0#
- Initial release under Apache II
- Includes:
- Ethernet
- I2C
- PCI
- Serial
- Startup
- IPL
- Flash