Freescale i.MX53 EVK Board Support Package#
This BSP supports the Freescale i.MX53 EVK board.
Note that Freescale has discontinued this hardware, and the BSP is no longer actively supported by QNX. QNX support for thei.MX53 is provided via the Freesacale i.MX53 Sabre AI and i.MX53 Quick Start Board (QSB) platforms.
Releases#
QNX Neutrino 6.5.0#
QNX Neutrino 6.4.1#
Features#
Feature | Planned Availability | Format | Notes |
Startup | Completed | SRC | . |
Serial | Completed | SRC | UART devices on RS-232 port 0 |
Ethernet | Completed | SRC | MX53 Fast Ethernet Controller (FEC) |
SD | Completed | SRC | . |
I2C | Completed | SRC | I2C Controller |
SPI | Completed | SRC | SPI controller |
WDT | Completed | SRC | . |
USB Host | Completed | BIN | Host1 with 7-port Hub (EHCI) |
Audio | Completed | SRC | |
Graphics | In Development | SRC | MX51 graphics controller driver for Graphic Framework (GF) |
DMA | Completed | SRC | |
CAN | Completed | SRC | |
SPI DATAFLASH | Completed | SRC | ATMEL DATAFLASH 4MBytes (AT45DB321D) |
IPL | Completed | SRC | FAT support on SDMMC |
NAND Flash | Completed | SRC | Micron MT29F4G08AACWC:C with (2048 + 64) byte pages |
QNX Neutrino 6.4.1 Change History#
Trunk#
Search Keywords: mx, i.mx, .mx53, evk, Freescale, MX, i.MX, .MX53, EVK, Babbage