Freescale i.MX35 PDK Board Support Package#
This BSP supports the Freescale i.MX35 Personal Development Kit (previously known as Stack Development System (3DS)) board.
Releases#
QNX Neutrino Trunk#
QNX Neutrino 6.4.0#
Features#
Feature | Planned Availability | Format | Notes |
Audio | Completed | SRC | Asahi Kasei AKM4647 (I2S based) |
CAN | Completed | SRC | MX35 FlexCAN |
DMA | Completed | SRC | Includes utility, library also included in BIN form |
EIDE | Completed | BIN | . |
Ethernet | Completed | SRC | MX35 Fast Ethernet Controller (FEC) |
Graphics | Completed | SRC | MX35 graphics controller driver for Graphic Framework (GF) |
I2C | Completed | SRC | MX35 I2C manager, master library also included in BIN form |
IPL | Completed | SRC | . |
NAND | Completed | SRC | Samsung 2GB |
NOR | Completed | SRC | Spansion 64MB |
RTC | Completed | SRC | rtc utility |
SD | Completed | SRC | MX35 eSDHCv2 |
Serial | Completed | SRC | On-board UART: MX35 UART |
SPDIF | Jan-2009 | SRC | MX35 SPDIF controller |
SPI | Completed | SRC | MX35 SPI master controller |
Startup | Completed | SRC | . |
Touchscreen | Completed | SRC | TSC2007 |
USB Host | Completed | BIN | host2 (EHCI) |
Watchdog Timer | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale i.MX35 PDK Trunk
QNX Neutrino 6.4 Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale i.MX35 PDK 1.0.0
1.0.0#
- Introduction of i.MX35 PDK
- Built using the latest 6.4.0 toolchain
- Support for ARM11 enabled procnto-v6
- Level 2 cache support
Search Keywords: mx, i.mx, .mx35, 3ds, pdk, Freescale, MX, i.MX, .MX35, PDK, 3DS