Hugh Brown
|
Re: Multiple Ethernet cause io-net freeze the console
|
Hugh Brown
03/23/2011 1:35 PM
post84220
|
Re: Multiple Ethernet cause io-net freeze the console
If you specify pci=0xX, the driver will only start on one interface. If you
remove the pci=0xX from the command line, all interfaces will be started.
On 11-03-23 11:46 AM, "William Luo" <community-noreply@qnx.com> wrote:
> I have 3 of RTL8139C+ on one PCI bus. The PCI number are line up with 0x0,
> 0x1, and 0x2. Each card can load properly with:
> io-net -d rtl pci=0xX -p tcpip
>
> But I can't make all three cards working at the same time. The console freezes
> when I load more than 1 card at the same time. Is this a driver issue? or NIC
> EEPROM issue?
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post84213
>
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|