I'm running Neutrino 6.4.0 on a Virtual machine, and having problems getting the Photon graphical interface to load.

When I run "ph" at the QNX command line, I get the following error:

# ph
Unable to start graphics driver(s)


The following is some useful info I retrieved based on comments in another post. Unfortunately, that post didn't 
complete and no solution was listed, so I'm hoping some can help me out here.


# sloginfo
.
.
May 20 16:40:48    1     8     0 phfont.so: init...
May 20 16:40:48    1     8     0 phfont.so: initialized.
May 20 16:40:48    1     8     0 phfont.so: '/dev/phfont[<32|64>]' server installed.
May 20 16:40:48    6     8     0 pci_init: found PCI device 15ad:405
May 20 16:40:48    6     8     0 VMWARE svgaid=0x90000002
May 20 16:40:48    2     8   200 io-display: driver doesn't support, or not configured for "argb8888" at 1024x768, 60Hz
May 20 16:40:48    2     8     0 /usr/photon/bin/io-graphics: gf_dev_attach('/dev/io-display/15ad,0405,0'): gf errno 4


# ls -l /dev/io-display/
total 0
crw-rw----  1 root      root         0,   1 May 20 14:09 15ad,0405,0


# pci -v
.
.
Class          = Display (VGA)
Vendor ID      = 15adh, VMware Inc
Device ID      = 405h,  Abstract SVGA II Adapter
PCI index      = 0h
Class Codes    = 030000h
Revision ID    = 0h
Bus number     = 0
Device number  = 15
Function num   = 0
Status Reg     = 290h
Command Reg    = 7h
Header type    = 0h Single-function
BIST           = 0h Build-in-self-test not supported
Latency Timer  = 40h
Cache Line Size= 8h un-cacheable
PCI IO Address  = 10f0h length 16 enabled
PCI Mem Address = d0000000h 32bit length 134217728 enabled
PCI Mem Address = d8000000h 32bit length 8388608 enabled
Subsystem Vendor ID = 15adh
Subsystem ID        = 405h
PCI Expansion ROM = 0h length 32768 disabled
Max Lat        = 0ns
Min Gnt        = 0ns
PCI Int Pin    = INT A
Interrupt line = 9
CPU Interrupt  = 9h
Capabilities Pointer = 40h
Capability ID        = 0h - Unknown
Capabilities         = 0h - 0h



Thanks,
Dan