Olaf Sassnick(deleted)
|
trouble detecting mSATA ssd
|
Olaf Sassnick(deleted)
05/01/2015 3:57 PM
post113764
|
trouble detecting mSATA ssd
Hi,
I have an Intel NUC D34010WYK and I'm currently booting the generic x86 BSP from a USB flash drive. The NUC has a mSATA
SSD and I would like to be able to boot from the SSD instead of the USB flash drive. If I type 'devb-ahci' I see the
following..
>>devb-ahci
>>Path=0 - AHCI (generic)
>>
(then it hangs. If I do ctrl-C and type devb-ahci again I get)
>>devb-ahci
>>xpt_configure: ahci SIM attach failure
and it hangs once more, but I can get back to the prompt via ctrl-c.
The SSD is set to AHCI mode in BIOS.
I've tested the board with a 3.5'' SATA hard drive connected to the SATA port and I can detect that hard drive via devb-
ahci. But I can't detect the mSATA ssd. Any suggestions are appreciated!
Thanks
|
|
|