Project Home
Project Home
Project Information
Project Info
wiki2877: TiDsplinkInstallnotes (Version 3)

Installing the DSPlink archive#


  1. QNX SDP 6.4.0
  2. Jacinto BSP 1.0.0 for 6.4.0
  3. Updated startup-jacinto

To install the updated startup files

  1. Contact your Support or Sales representitive to retrieve the updated startup files.
  2. The following files have been updated: 'build', 'init_intrinfo.c', and 'main.c'
  3. Copy the updated files to the startup folder of the BSP directory (<install_dir>/src/hardware/startup/boards/jacinto/)
  4. Rebuild startup

To install the DSPlink archive:

  1. Install the 6.4.0 Jacinto BSP by extracting to the directory of your choice
  2. Extract the Dsplink archive into the root of where the BSP is installed or a directory of your choice
  3. Navigate to the installation directory
  4. Run the script to set up the installation directory for the Dsplink components without affecting the BSP
	. ./
  1. Run make install to compile the DSPlink and the BSP.

Active Tab Versions Inactive Tab - left sideAssociations Inactive Tab - left sideAttachments Inactive Tab - left sideBack LinksInactive Tab - right side  
    Version From To Version Comment Created By
    Version 7 Add notes for configuring Dsplink Kevin Mar(deleted)  -  07/28/2009
    Version 6 Kevin Mar(deleted)  -  07/15/2009
    Version 5 Revert changes for Dsplink 1.40.05 Kevin Mar(deleted)  -  03/03/2009
    Version 4 Kevin Mar(deleted)  -  03/03/2009
    Version 3 Kevin Mar(deleted)  -  03/02/2009
    Version 2 Corrected the case in "DSPlink". Steve Reid  -  11/07/2008
    Version 1 Added instructions for installing the Dsplink archive. Steve Reid  -  11/07/2008