DRAFT IN PROGRESS
This page contains important information required to use BSPs with the pre-released version of the QNX Software Development Platform 6.4.0.
What's New#
- 6.4.0 BSPs are packaged differently than their predecessors:
- It is no longer necessary to run the setupbsp script, see Installing the BSP below
- Documentation is now provided in Wiki format on Foundry27
- 6.4.0 BSPs were rebuilt using the new 6.4 libraries and toolchain. Consequently, they will only run on QNX Neutrino 6.4.
Available BSPs#
The following experimental BSPs have been ported to 6.4:
LINKS WILL BE PROVIDED SHORTLY
- Centrality atlas-ii evb
- Centrality titan evb
- Freescale i.mx21 ads
- Freescale i.mx31 ads
- Freescale mpc8x50 ads
- Freescale mpc8572 ds
- Renesas sh7785 sdk
Installing the BSP#
IDE 4.5#
- Download the BSP archive to your host development system
- From the IDE,
- Select File > Import and then pick QNX > QNX Board Support Package, click Next
- Select Select Package... and browse to the location of the BSP archive, click Finish
Command line#
- Download the BSP archive to your host development system
- Extract the BSP archive in your workspace
- Run setenv.sh (through ksh on Windows) TEMPORARY STEP THAT WILL GET REMOVED IN UPCOMING BSP RE-SPINS
- Type make