wiki2579: SDP_6.4.0_BSP_Info (Version 39) |
SDP 6.4.X BSP Information#This page contains important information required to compile and package BSPs with the QNX Software Development Platform 6.4.0 and 6.4.1 . The release number ( e.g. 6.4.1 ) will be referred to explicitly if instructions are applicable only to the stated release; otherwise 6.4.X will be used.
What's New #6.4.1#
6.4.0#
6.4.0 and 6.4.1 Interoperability #Building 6.4.0 BSPs with QNX SDP 6.4.1 #Generally speaking, a 6.4.0 BSP should compile and work with QNX SDP 6.4.1. In some cases however, the BSP ships prebuilt components which may not be compatible with binaries shipped with 6.4.1 if there has been an API change. Having said this, 6.4.0 BSPs are regression-tested against SDP 6.4.1 to try and identify any such incompatibilities.Building 6.4.1 BSPs with QNX SDP 6.4.0#This is not supported, and upgrading to SDP 6.4.1 is required. NOTE: New BSPs will be delivered under 6.4.0 unless 6.4.1 is strictly required e.g. PPC-SPE.
Available BSPs#List of available BSPs can be found here. Building 6.4.X BSPs#Importing and Building a BSP archive with the IDE#
Importing and Building a BSP from Foundry 27 using IDE 4.6#
How to use the 6.4.0 tool chain within IDE 4.6 ( which is shipped with SDP 6.4.1) #Prerequisite: QNX SDP 6.4.0 must also be installed.
Building BSPs at the command line#
Resources#
|