Release Notes for the QNX Neutrino 6.4.1 BSP for Freescale i.MX51 PDK 1.0.0#

System requirements#

• QNX Neutrino RTOS 6.4.1

Host development system

• QNX Momentics 6.4.1
• Terminal emulation program (Qtalk, Momentics IDE Terminal, tip, HyperTerminal, etc.)
• RS-232 serial port or a USB-to-serial adapter, and a straight-through serial cable
• Ethernet link

Known Issues for This BSP#

• SD card works only in read-only mode on SD1 Port.
• FEC io-pkt driver stalls during bulk transimission of ethernet packets such as during FTP put instruction.