wiki2978: Nto640FreescaleMgt5200b1.0.0Releasenotes (Version 3) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Release Notes for the QNX Neutrino 6.4.0 BSP for Freescale Lite5200B and Media5200 1.0.0#System requirements#Target system
Host development system
System Layout#The tables below depict the memory layout for the image and for the flash.Memory layout
Flash layout for Lite5200B (U-Boot view)
Flash layout for Lite5200B (IPL view)
Flash layout for Media5200 (U-Boot or IPL view)
The interrupt vector table can be found in the buildfile located at src/hardware/startup/boards/mgt5200B/build
Getting Started#Starting Neutrino#Step 1: Build the BSP For instructions about building a BSP OS image, please refer to the chapter Working with a BSP in the Building Embedded Systems manual. Note: This BSP will build a default OS image for the Freescale Media5200 board. If you need to build an OS image for the Freescale Lite5200B, you need to change the buildfile. The buildfile has commented-out sections for the Lite5200B. Simply uncomment them and comment out the Media5200 sections.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Versions | Associations | Attachments (1) | Back Links | |||||||