wiki3125: AtmelAT91SAM9RL64EKEvaluationBoard (Version 1) | ||
Release Notes for the QNX Neutrino 6.4.0 BSP for Atmel AT91SAM9Rl64-EK Board#System requirements#Target system#
Host development system#
Summary of driver commands#The driver command lines below are specific to the Atmel AT91SAM9RL64 board. See the online docs for each driver for additional command-line options and other details. Note: Some of the following drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board. Startup:#Command:startup-at91sam9xx-at91sam9rl64 -vvvv Serial:#Command:devc-serusart -F -S -u2 -b115200 -c100000000 0xfffb0000^2,6Required binaries:
devc-seratdbgu -e -F -S -b115200 -c100000000 0xfffff200,1Required binaries:
SPI:#Command:spi-master -d at91sam9xxspi base=0xfffcc000,irq=13 &Required binaries:
ETFS NAND flash#Command:fs-etfs-at91sam9xx -D addr=0x40000000 -m /fs/etfsRequired binaries:
Note:
For more information about these commands, see the Neutrino Utilities Reference.
Known issues for this BSP#
|
||
Versions | Associations | Attachments (9) | Back Links | |||||||