This BSP supports the Freescale P1020RDB-PC board.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download |
---|---|---|---|---|---|---|---|---|
November 01, 2013 | 1.3.0 | QNX Momentics 6.5.0 SP1 | 6.5.0 Generic Notes | Here | QDL and Apache II | Released | Freescale | Project Downloads |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
IPL | Completed | SRC | |
Startup | Completed | SRC | |
Serial | Completed | SRC | |
Ethernet | Completed | SRC | |
NOR Flash | Completed | SRC | |
NAND Flash | Completed | SRC | |
PCIe | Completed | SRC | |
RTC | Completed | SRC | |
I2C | Completed | SRC | |
USB | Completed | BIN | |
MMCSD | Completed | SRC | |
SEC support | Completed |
This BSP supports the Freescale P1020RDB-PA board.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download |
---|---|---|---|---|---|---|---|---|
March 28, 2012 | 1.0.2 | QNX Momentics 6.5.0 | 6.5.0 Generic Notes | Here | QDL and Apache II | Released | Freescale | Project Downloads |
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download |
---|---|---|---|---|---|---|---|---|
Latest | trunk | QNX Momentics 6.4.1 | 6.4.1 Generic Notes | Here | QDL and Apache II | Experimental | QNX | Project Downloads |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
Startup | Completed | SRC | |
Serial | Completed | SRC | |
Ethernet | Completed | SRC | |
NOR Flash | Completed | SRC | |
NAND Flash | Completed | SRC | |
PCIe | Completed | SRC | |
RTC | Completed | SRC | |
I2C | Completed | SRC | |
USB | Completed | BIN | |
MMCSD | Completed | SRC | |
Watchdog | Completed | SRC |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
Startup | Completed | SRC | |
Serial | Completed | SRC | |
Ethernet | Completed | SRC | |
NOR Flash | Completed | SRC | |
NAND Flash | Completed | SRC | |
RTC | Completed | SRC | |
I2C | Completed | SRC | |
USB | Completed | BIN | |
MMCSD | Completed | SRC |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.