This BSP supports the Freescale MPC8349E MDS board.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
---|---|---|---|---|---|---|---|---|---|
latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Project Downloads | Coming Soon |
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
---|---|---|---|---|---|---|---|---|---|
2007-09-18 | 1.0.0 | QNX Momentics 6.3.2 | 6.3.2 Generic Notes | here | Apache II | QNX | QNX | QNX Download Center | none |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
Startup | Completed | SRC | . |
Serial | Completed | SRC | UART devices on RS-232 port 0-1 |
Ethernet | Completed | BIN | eTSEC Ethernet controller in TSEC compatibility mode |
I2C | Completed | SRC | I2C controller |
PCI | Completed | SRC | . |
Flash | Completed | SRC | Generic Flash Driver |
IPL | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.