This BSP supports the Freescale Lite5200B and Media5200 boards.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
---|---|---|---|---|---|---|---|---|---|
Latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Project Downloads | Coming Soon! |
2009-11-20 | 1.0.0 | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | QNX | QNX | Project Downloads | Coming Soon! |
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
---|---|---|---|---|---|---|---|---|---|
2007-09-12 | 1.0.4 | QNX Momentics 6.3.x SP2 or later | 6.3.2 Generic Notes | here | MEULA and Apache II | QNX | QNX | QNX Download Center | none |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
Audio (Media5200 Only) | Completed | SRC | Realtek ALC658 |
DMA | Completed | BIN | Bestcomm5200 utility and library |
EIDE | Completed | BIN | On-board ATA controller |
Ethernet | Completed | SRC | On-board 10/100 BaseT Ethernet controller |
I2C | Completed | SRC | mpc5200 I2C manager |
Flash | Completed | SRC | AMD Flash: 32 MB (Lite5200b), 64 MB (Media5200) |
PCI | Completed | SRC | On-board PCI controller |
Serial | Completed | SRC | On-board UART: serpsc UART |
SPI | Completed | SRC | On-board SPI controller |
Startup | Completed | SRC | . |
USB Host | Completed | BIN | OHCI |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board. The default buildfile starts the serial driver for the Media5200 board, if you have a Lite board, you'll need to comment the Media5200 serial driver section and uncomment the Lite serial driver section.