This BSP supports the Freescale MPC5121e ADS board.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag | Kernel Benchmark |
---|---|---|---|---|---|---|---|---|---|---|
Latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Project Downloads | Coming Soon | |
2008-11-07 | 1.0.0 | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | Apache II | QNX | QNX | Project Downloads | Coming Soon | Benchmark Downloads |
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
---|---|---|---|---|---|---|---|---|---|
2008-12-19 | 1.1.0 (20081219) | QNX Momentics 6.3.x SP3 or later | 6.3.2 Generic Notes | included in archive | QDL and Apache II | QNX | QNX | Project Downloads | none |
2008-10-08 | 1.0.0 | QNX Momentics 6.3.x SP3 or later | 6.3.2 Generic Notes | here | QDL and Apache II | QNX | QNX | QNX Download Center | none |
2008-09-17 | 1.0.0 (20080917) | QNX Momentics 6.3.x SP3 or later | 6.3.2 Generic Notes | included in archive | QDL and Apache II | Experimental | QNX | Project Downloads | none |
2008-06-30 | 1.0.0 (20080630) | QNX Momentics 6.3.x SP3 or later | 6.3.2 Generic Notes | included in archive | QDL and Apache II | Experimental | QNX | Project Downloads | none |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
Audio | Completed | SRC | AC97 |
CAN | Completed | SRC | . |
DMA | Completed | SRC | . |
EIDE | Completed | BIN | . |
Ethernet | Completed | SRC | . |
Graphics | Completed | BIN | . |
I2C | Completed | SRC | . |
IPL | Oct/08 | SRC | . |
NAND | Completed | SRC | . |
NOR | Completed | SRC | . |
EIDE | Completed (PIO) Oct/08 (DMA) | SRC | . |
PCI | Completed | SRC | . |
PCIe | Completed | SRC | . |
Serial | Completed | SRC | . |
SPI | Completed | SRC | . |
Startup | Completed | SRC | . |
RTC | Completed | SRC | . |
USB | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.