This BSP supports the Atmel AT91SAM9263-EK board.
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download |
---|---|---|---|---|---|---|---|---|
2010-04-01 Updated! | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | QDL and Apache II | Experimental | QNX | Project Downloads |
Feature | Planned Availability | Format | Notes |
---|---|---|---|
IPL | Completed | SRC | . |
STARTUP | Completed | SRC | . |
DEBUG | Completed | SRC | . |
USART | Completed | SRC | . |
NAND | Completed | SRC | Micron MT29F2G08AAC (256 MB) NAND Flash |
SPI | Completed | SRC | . |
AUDIO | Completed | SRC | . |
GRAPHICS and Two-D Accelerator | Completed | SRC | . |
MMC SD | Completed | SRC | . |
USB | Completed | BIN | 1-OHCI |
DMA | Completed | SRC | . |
EMAC | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.