TeamForge : Post

Forum Topic - Pg.i830: (6 Items)

View: as

Klaus Pantleon(deleted)

08/09/2011 9:22 AM

post87921

Is there a newer "test" Pg.i830?
I have the SIEMENS PC 647C running with Pg.flatdc but now I need to support different not VESA standard screens 
(1680x1050). This resolution is not doable with VESA mode switcher and therefore I want to test the Pg.i830.

The graphic chip is an Intel mobile (less power for industrial environment) and the device id is 0x46.
If I add the 0x46 to the Pg.i830 in crttrap.list there are of course entries in the crt.$NODE but none of the Pg.i830 
entries is working :(

Best regards, Klaus

Oleg Bolshakov(deleted)

08/09/2011 11:28 AM

post87932

Pg.i830

Hi Klaus,

The 0x8086:0x0046 is supported by the devg-intelhd.so driver in the QNX6. 
Unfortunately, this driver isn't back-ported to the QNX4.

Are you sure that 1680x1050 mode isn't supported by VESA. Is this mode present 
in the output of the following command?

# /qnx4/graphics/bin/show_vesa

You can try to upgrade BIOS firmware on the SIEMENS PC 647C and when try the 
show_vesa again.

-- 
Respectfully,
Oleg

> Is there a newer "test" Pg.i830?
> I have the SIEMENS PC 647C running with Pg.flatdc but now I need to support 
different not VESA standard screens (1680x1050). This resolution is not doable 
with VESA mode switcher and therefore I want to test the Pg.i830.
> 
> The graphic chip is an Intel mobile (less power for industrial environment) 
and the device id is 0x46.
> If I add the 0x46 to the Pg.i830 in crttrap.list there are of course entries 
in the crt.$NODE but none of the Pg.i830 entries is working :(
> 
> Best regards, Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post87921
>

Klaus Pantleon(deleted)

08/10/2011 2:19 AM

post87955

Re: Pg.i830

Thanks Oleg,

but I tried it already with Linux and "hwinfo --framebuffer" and there is only 1600x1200, 1280x1024 and lower resolution
 offered.
The BIOS update I will ask SIEMENS.
Actually I'm trying to use the Hydra.ms as Modeswitcher and the Pg.i830 as driver.
The graphic is coming up. but I can only use the offered VESA resolutions.

Is there a possibility for a backport of the QNX6 driver?

Best regards,
Klaus

Oleg Bolshakov(deleted)

08/10/2011 4:30 AM

post87964

Re: Pg.i830

Hi Klaus,

Yes, backporting of the intelhd driver is possible, but, as far as I know, 
there isn't timeframe for this work.

-- 
Respectfully,
Oleg

> Thanks Oleg,
> 
> but I tried it already with Linux and "hwinfo --framebuffer" and there is 
only 1600x1200, 1280x1024 and lower resolution offered.
> The BIOS update I will ask SIEMENS.
> Actually I'm trying to use the Hydra.ms as Modeswitcher and the Pg.i830 as 
driver.
> The graphic is coming up. but I can only use the offered VESA resolutions.
> 
> Is there a possibility for a backport of the QNX6 driver?
> 
> Best regards,
> Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post87955
>

Klaus Pantleon(deleted)

08/10/2011 6:30 AM

post87967

Re: Pg.i830

Hi Oleg,

I will ask the product manager who asked for the dedicated resolution about the money he will pay. To whom I have to 
make contact ? QNX-SoftwareSystems?

Regards,
Klaus

Oleg Bolshakov(deleted)

08/10/2011 9:42 AM

post87979

Re: Pg.i830

Klaus,

Yes, please, contact your QNX sales team. I think that this driver will be 
ported to the QNX4 sooner or later. But, I guess, custom engineering should 
reduce a release timeframe.

-- 
Respectfully,
Oleg

> Hi Oleg,
> 
> I will ask the product manager who asked for the dedicated resolution about 
the money he will pay. To whom I have to make contact ? QNX-SoftwareSystems?
> 
> Regards,
> Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post87967
>

Return