04/17/2014 10:12 AM
post109953
|
I have a freescale imx6 target and a BSP based on sabrelite.
Additionally I have verified that the same thing happens on the sabrelite board with the released BSP.
If you compare the system clock by issuing the 'date' command and compare it to a clock kept by an RTC, the system clock
loses about 4 seconds a day.
Has anyone seen this and know of a correction for the setup on the imx6, instead of just setting up a crontab to sync
the clock to the rtc every hour?
|
|
|