Michael Tatarinov(deleted)
|
Re: RE: devel/netbsd-iscsi-initiator
|
Michael Tatarinov(deleted)
05/19/2009 12:25 AM
post29639
|
Re: RE: devel/netbsd-iscsi-initiator
Thanks, but...
root@vm8482-2 root $ dd if=/dev/zero of=zzz.img bs=1024k count=1024
1024+0 records in
1024+0 records out
root@vm8482-2 root $ ls -l zzz.img
-rw-rw-r-- 1 root root 1073741824 May 19 09:16 zzz.img
root@vm8482-2 root $ mkqnx6fs zzz.img
Format fs-qnx6: 1048560 blocks, 131072 inodes, 4 groups
root@vm8482-2 root $ mount -vvv -t qnx6 zzz.img /mnt/tmp
Parsed: mount from [zzz.img] mount on [/mnt/tmp] type [qnx6]
exec: mount_qnx6 zzz.img /mnt/tmp
Using internal mount (mount_qnx6 not found)
Type [qnx6] Flags 0x00000000
Device [zzz.img] Directory [/mnt/tmp]
Options [NULL]
root@vm8482-2 root $ mount | grep zzz
/root/zzz.img on /mnt/tmp type qnx6
Unfortunately, I can not see the "QNX Community Fuse Project" (The page you requested cannot be found.)
|
|
|
Pavol Kycina
|
Re: RE: devel/netbsd-iscsi-initiator
|
Pavol Kycina
02/13/2013 2:27 AM
post99242
|
Re: RE: devel/netbsd-iscsi-initiator
Hello,
just a question on an old discussion.
Would it be feasible to use mentioned netbsd-iscsi-initiator with devb-loopback which is now available?
I am looking to find a decent RAID solution for QNX6. There are some HW RAID arrays available with iSCSI, so it could be
a possible path...
Thanks, PKY
> To mount a "QNX4/QNX6" filesystem (or to that mater, to load any
> fs-*.so), you need a devb-* binary. Unfortunately, there is no "devb-fd"
> kind of thing exist.
>
> I can only suggest you take a look of the "QNX Community Fuse Project".
> (http://community.qnx.com/sf/projects/qnx_community_fuse_project).
> Managers like "ntfs-3g" would be able to take a file and put a file
> system on it.
>
> -xtang
>
>
> > -----Original Message-----
> > From: Michael Tatarinov [mailto:community-noreply@qnx.com]
> > Sent: May 18, 2009 1:46 AM
> > To: general-pkgsrc
> > Subject: devel/netbsd-iscsi-initiator
> >
> > Hello
> > I tried netbsd-iscsi-initiator with xtang patches, but i don't mount
> fs,
> > why?
> >
> > root@vm8482-2 root $ ls -l /fs/iscsi/192.168.138.246/target0/storage
> > -rw-r--r-- 1 root root 4294967296 May 18 08:36
> > /fs/iscsi/192.168.138.246/target0/storage
> > root@vm8482-2 root $ mkqnx6fs
> /fs/iscsi/192.168.138.246/target0/storage
> > Format fs-qnx6: 4194288 blocks, 131072 inodes, 8 groups
> > root@vm8482-2 root $ mount -vvv -t qnx6
> > /fs/iscsi/192.168.138.246/target0/storage /mnt/tmp
> > Parsed: mount from [/fs/iscsi/192.168.138.246/target0/storage] mount
> on
> > [/mnt/tmp] type [qnx6]
> > exec: mount_qnx6 /fs/iscsi/192.168.138.246/target0/storage /mnt/tmp
> > Using internal mount (mount_qnx6 not found)
> > Type [qnx6] Flags 0x00000000
> > Device [/fs/iscsi/192.168.138.246/target0/storage] Directory
> [/mnt/tmp]
> > Options [NULL]
> > mount: Can't mount /mnt/tmp (type qnx6)
> > mount: Possible reason: No such device or address
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post29606
|
|
|