Mohammad Adeel Mian
|
Establishing 2 simultaneous FTP sessions
|
Mohammad Adeel Mian
10/27/2011 5:52 PM
post89704
|
Establishing 2 simultaneous FTP sessions
Hi,
I'm trying to establish 2 simultaneous FTP sessions but I'm facing some probelms mapping the interface with the IP
address and declaring the route. The first session connects and I'm able to download but the second session fails to
connect with the FTP server.
I'm using the following commands:
For first session:
ifconfig [interface1] [Gateway_IP_Address1]
route add [FTP_Server1_IP_Address] -interface [Gateway_IP_Address1]
setconf CS_RESOLVE nameserver_[DNS ADDRESS]
ftp [FTP_Server1_IP_Address]
For second session:
ifconfig [interface2] [Gateway_IP_Address2]
route add [FTP_Server2_IP_Address] -interface [Gateway_IP_Address2]
setconf CS_RESOLVE nameserver_[DNS ADDRESS]
ftp [FTP_Server2_IP_Address]
I've seen that the if the two FTP servers (ex: 192.168.0.100 & 192.168.0.102) and Gateway_IP_Addresses (ex: 192.168.0.105 & 192.168.0.106) are on the same subnet, adding the first route results in the following entry in the routing table: (destination) 192.168.0.0/24 --> (gateway) 192.168.0.105
This I beleive might be the reason why the I am not able to connect to the second FTP server (correct?). Also since both
the gateway IP address are of the same subnet, the network mask is also the same.
How can this issue be resolved.
Thanks!
|
|
|