6.5.0 X86

A customer wonders how to use their 3-NIC X86 board to forward packets like a switch does i.e. configure all 3 NICs to 
be on the same logical subnet, yet be physically connected to different cables/other NICs on each port, allowing those 
external devices to communicate with each other and QNX via the QNX box that will forward packets as required between 
the ports.

Normally, we do not allow this, and I understand that. Is there a mode we can se tthat will achieve this, or do we 
strictly require each NIC to be on a different subnet ?

Thanks !

Dave