Hi Dave:
	What devn driver is it?   Is it one of ours that we've
developed? Can we move this post to the drivers forum as well since I
know that Hugh monitors that one and may also be able to comment.
Certainly this isn't something that should be influenced by the shim
layer. 

	Thanks,
		Robert.

-----Original Message-----
From: Dave Bott [mailto:community-noreply@qnx.com] 
Sent: Friday, August 15, 2008 4:11 PM
To: ionetmig-networking
Subject: MAC not getting set with io-pkt - worked in io-net

I have a customer using G4 PowerMacs as QNX targets w. 6.3.2 Works
great, including the onboard GMAC NIC

Moving to io-pkt, the GMAC driver runs with the shim, but is not picking
up the MAC. It's read directly from the firmware, and set in startup in
the hw area and read back in the driver from there.

Any obvious reason why that wouldn't continue to work ? It's possible
the customer didn't do everything quite right, but this is a pain for
them - they have 15 MACs *not* running io-pkt...

Any ideas gratefully accepted !

Dave

_______________________________________________
io-net migration
http://community.qnx.com/sf/go/post11892