Zhiyuan Ren
|
problem with intel 82576 and e1000 driver
|
Zhiyuan Ren
09/02/2009 11:42 AM
post37174
|
problem with intel 82576 and e1000 driver
I just installed 6.4.1 on a Xeon system with dual 82576 Gb ethernet controllers. The e1000 driver loaded fine that gave
me wm0 and wm1 devices. However networking doesn't work (plugged in our network, DHCP failed).
I then connected the system directly to a working laptop, and here are the ping behaviors:
if I initiate ping from the laptop, nicinfo shows all packets and bytes received OK, but no increment on Tx packets and
bytes.
if I initiate ping from the system, nicinfo shows all packets and bytes transmitted OK, with some increment on the Rx
packets and bytes but less than the number transmitted.
greatly appreciate any input on this.
ZY
|
|
|