Sean Boudreau(deleted)
10/08/2008 10:57 AM
post14695
|
On Tue, Oct 07, 2008 at 09:46:34AM -0400, Christian Christelis wrote:
> Hello,
>
> I have a question regarding a converter. I am busy building a driver for
> a unique network device. The driver is not an ethernet driver. I would
> like to send IP packets over it for tests though and for this I need a
> converter. I have not been able to find more, than sparse documentation
> on converters. The converter does not need to do more than just change
> the packet type from ip to dl. (dl is the custom packets that the driver
> expects).
>
> I would like to know if:
> 1) A converter needs to create advertisement packets?
Nope. It may need to handle receiving them though...
> 2) Will specifying the top and bottom type in io_net_registrant_t be
> enough to ensure there is a right type conversion? (Assuming no changes
> need to be made to the actual packet content.)
Specifying the types will ensure you receive "ip" and
"dl" type packets. You have to do any conversion yourself.
> 3) Can the converter be loaded by the io-net "-p" option?
Yes, if you specify the fullpath to the dll.
>
> Thank you.
>
> _______________________________________________
> Networking Drivers
> http://community.qnx.com/sf/go/post14595
>
|
|
|