Gervais Mulongoy
|
Re: How to load devnp-ncm.so in QNX (650SP1) OS?
|
Gervais Mulongoy
11/07/2012 7:53 AM
post96943
|
Re: How to load devnp-ncm.so in QNX (650SP1) OS?
You can use either method, but regarding method 1, check the usage
messages for the ncm driver as it provides instructions on how to load
it when you start io-pkt:
# use /lib/dll/devnp-ncm.so
Also check the output of sloginfo after you try to load the driver as it
will indicate initialization errors.
|
|
|
DIPANKAR SAHA(deleted)
|
Re: How to load devnp-ncm.so in QNX (650SP1) OS?
|
DIPANKAR SAHA(deleted)
11/09/2012 5:38 AM
post97032
|
Re: How to load devnp-ncm.so in QNX (650SP1) OS?
I used following command and it worked -
# io-pkt-v4-hc -d ncm pnp verbose &
or you can specify path i.e. #io-pkt-v4-hc -d ncm pnp path=/lib/dll/devnp-ncm.so verbose &
But make sure the sequence. It matters.
If you give "pnp" after "path" then it will not work.
|
|
|