|
Hugh Brown
|
Re: Broadcom 5715 (did=1678) support needed
|
|
Hugh Brown
04/14/2010 8:23 AM
post51643
|
Re: Broadcom 5715 (did=1678) support needed
If you start the driver as follows
io-pkt-v4 -dtigon3 vid=0x14e4,did=0x1678
does the driver work?
On 10-04-14 8:14 AM, "Gunter Geigemueller" <community-noreply@qnx.com>
wrote:
> Hi,
>
> we need support for the following ethernet controller:
>
>
> Class = Network (Ethernet)
> Vendor ID = 14e4h, Broadcom Corporation
> Device ID = 1678h, NetXtreme BCM5715 Gigabit Ethernet
> PCI index = 0h
> PCI Mem Address = fbff0000h enabled
> PCI Mem Address = fbfe0000h enabled
> PCI Int Pin = INT A
> Interrupt line = 7
> CPU Interrupt = 7h
>
> Class = Network (Ethernet)
> Vendor ID = 14e4h, Broadcom Corporation
> Device ID = 1678h, NetXtreme BCM5715 Gigabit Ethernet
> PCI index = 1h
> PCI Mem Address = fbfd0000h enabled
> PCI Mem Address = fbfc0000h enabled
> PCI Int Pin = INT B
> Interrupt line = 11
> CPU Interrupt = bh
>
> Some of the topics suggested that it should work with the tigon3 driver but it
> doesn't. Any ideas? What about QNX 6.5?
>
> Thanks,
> Albrecht
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post51642
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
|
|
