We have a problem with the 82576 right now. I am busy working on updating
the driver.

Hugh.


On 10-03-11 7:02 AM, "Nagaraj Salotagi" <community-noreply@qnx.com> wrote:

> Hi I have a Intel 82576 dual port GB ethernet adapter on my card. I installed
> QNXv6.4.1 on my board. After installation i boot and in the network
> configuration i see two devices wm0 and wm1. I assign IP address and try
> pinging from my laptop but the ping doesn't work (request timed out).
> I have connected the wm1 interface to my laptop.
> the IP address are as follows:
> wm1:192.168.0.10 netmask 255.255.255.0
> laptop:192.168.0.12 netmask 255.255.255.0
> 
> The ping from both sides do not work. The same problem is there with wm0 also.
> Please find attached the driver logs which seems to be fine and also the pci
> dump.
> 
> I need to solve this ASAP. If anybody has faced similar issue please provide
> inpts to solve the issue.
> 
> Regards,
> Nagaraj
> 
> 
> 
> _______________________________________________
> 
> Networking Drivers
> http://community.qnx.com/sf/go/post49258

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd.        (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8