Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
IDE/Discussion/General/20090305 can't open some projects/List of Posts
Forum Topic - 20090305 can't open some projects: (7 Items)
   
Update
Mario Charest
03/06/2009 11:02 AM
post23782
20090305 can't open some projects   
There are some project I can't open.  I get a pop-up that says.  An internal error occured during: "Initialize Indexing"
.  java.lang.NullPointerException.

I attached the log file
Attachment: Text .log 23.92 KB
Alex Chapiro
03/06/2009 11:33 AM
post23789
Re: 20090305 can't open some projects   
On 06/03/2009 11:02 AM, Mario Charest wrote:
> There are some project I can't open.  I get a pop-up that says.  An internal error occured during: "Initialize 
Indexing".  java.lang.NullPointerException.
>
> I attached the log file
>
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post23782
>    
Did you somehow touch $(QNX_HOST)/etc/qcc directory? Can you archive it 
and send it to me?
Mario Charest
03/06/2009 11:39 AM
post23793
Re: 20090305 can't open some projects   
> On 06/03/2009 11:02 AM, Mario Charest wrote:

> Did you somehow touch $(QNX_HOST)/etc/qcc directory? 

Not that I'm aware of.  I ge theproblem on both Windows and Linux so I doubt I would have done it on two machines by 
mistake.

> Can you archive it  and send it to me?

While trying to create a scaled down version of the project I realized all it needed was the .project and .cproject for 
the problem to show up. The problem happen on projects that I converted to C/C++ project about a month ago.  All the 
other projects that were created as C/C++ are ok.
Attachment: Text project.tgz 1.29 KB
Alex Chapiro
03/06/2009 2:19 PM
post23815
Re: 20090305 can't open some projects   
This project seems to me corrupted. There is no toolchain defined. The 
same happens if I try to open it using build I20090221. How did you get it?
It is easy to fix. Create new empty one with desired attributes, then 
copy all stuff but '.'-started files, and here you go.

On 06/03/2009 11:39 AM, Mario Charest wrote:
>> On 06/03/2009 11:02 AM, Mario Charest wrote:
>>      
>
>    
>> Did you somehow touch $(QNX_HOST)/etc/qcc directory?
>>      
>
> Not that I'm aware of.  I ge theproblem on both Windows and Linux so I doubt I would have done it on two machines by 
mistake.
>
>    
>> Can you archive it  and send it to me?
>>      
>
> While trying to create a scaled down version of the project I realized all it needed was the .project and .cproject 
for the problem to show up. The problem happen on projects that I converted to C/C++ project about a month ago.  All the
 other projects that were created as C/C++ are ok.
>
>
>
>
>
>
>
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post23793
>
Mario Charest
03/27/2009 4:12 PM
post25479
Re: 20090305 can't open some projects   
> This project seems to me corrupted. There is no toolchain defined. The 
> same happens if I try to open it using build I20090221. How did you get it?

I assume the .cproject got corrupted following svn update/commit.  I have some project that are ok, others that are 
screwed up.  Yet they are all branches of the same trunk ;-(  Big mess.

> It is easy to fix. Create new empty one with desired attributes, then 
> copy all stuff but '.'-started files, and here you go.

Not sure how that helps, can't really create a new project to import stuff in, have about 100 make target defined.  
Don't really feel like going through that...

At the moment i'm comparing .cproject to figure out if I can fix it.

> 
> On 06/03/2009 11:39 AM, Mario Charest wrote:
> >> On 06/03/2009 11:02 AM, Mario Charest wrote:
> >>      
> >
> >    
> >> Did you somehow touch $(QNX_HOST)/etc/qcc directory?
> >>      
> >
> > Not that I'm aware of.  I ge theproblem on both Windows and Linux so I doubt
>  I would have done it on two machines by mistake.
> >
> >    
> >> Can you archive it  and send it to me?
> >>      
> >
> > While trying to create a scaled down version of the project I realized all 
> it needed was the .project and .cproject for the problem to show up. The 
> problem happen on projects that I converted to C/C++ project about a month ago
> .  All the other projects that were created as C/C++ are ok.
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post23793
> >    
>
Alex Chapiro
03/27/2009 4:58 PM
post25484
Re: 20090305 can't open some projects   
Are you still using I20090305? I believe that recently the problem was 
found and fixed. Stay tuned on the Foundry27 downloads:-)

Alex


On 27/03/2009 4:12 PM, Mario Charest wrote:
>> This project seems to me corrupted. There is no toolchain defined. The
>> same happens if I try to open it using build I20090221. How did you get it?
>>      
> I assume the .cproject got corrupted following svn update/commit.  I have some project that are ok, others that are 
screwed up.  Yet they are all branches of the same trunk ;-(  Big mess.
>
>    
>> It is easy to fix. Create new empty one with desired attributes, then
>> copy all stuff but '.'-started files, and here you go.
>>      
> Not sure how that helps, can't really create a new project to import stuff in, have about 100 make target defined.  
Don't really feel like going through that...
>
> At the moment i'm comparing .cproject to figure out if I can fix it.
>
>    
>> On 06/03/2009 11:39 AM, Mario Charest wrote:
>>      
>>>> On 06/03/2009 11:02 AM, Mario Charest wrote:
>>>>
>>>>          
>>>
>>>        
>>>> Did you somehow touch $(QNX_HOST)/etc/qcc directory?
>>>>
>>>>          
>>> Not that I'm aware of.  I ge theproblem on both Windows and Linux so I doubt
>>>        
>>   I would have done it on two machines by mistake.
>>      
>>>
>>>        
>>>> Can you archive it  and send it to me?
>>>>
>>>>          
>>> While trying to create a scaled down version of the project I realized all
>>>        
>> it needed was the .project and .cproject for the problem to show up. The
>> problem happen on projects that I converted to C/C++ project about a month ago
>> .  All the other projects that were created as C/C++ are ok.
>>      
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> General
>>> http://community.qnx.com/sf/go/post23793
>>>
>>>        
>
>
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post25479
>
>
Mario Charest
03/30/2009 11:01 AM
post25548
RE: 20090305 can't open some projects   

> -----Original Message-----
> From: Alex Chapiro [mailto:community-noreply@qnx.com]
> Sent: March-27-09 4:59 PM
> To: general-ide
> Subject: Re: 20090305 can't open some projects
> 
> Are you still using I20090305? I believe that recently the problem was
> found and fixed. Stay tuned on the Foundry27 downloads:-)

Yes 20090305.  I managed to manually fix the .cproject wasn`t pretty, and I had no idea what I was doing ;-)

> 
> Alex
> 
> 
> On 27/03/2009 4:12 PM, Mario Charest wrote:
> >> This project seems to me corrupted. There is no toolchain defined.
> The
> >> same happens if I try to open it using build I20090221. How did you
> get it?
> >>
> > I assume the .cproject got corrupted following svn update/commit.  I
> have some project that are ok, others that are screwed up.  Yet they
> are all branches of the same trunk ;-(  Big mess.
> >
> >
> >> It is easy to fix. Create new empty one with desired attributes,
> then
> >> copy all stuff but '.'-started files, and here you go.
> >>
> > Not sure how that helps, can't really create a new project to import
> stuff in, have about 100 make target defined.  Don't really feel like
> going through that...
> >
> > At the moment i'm comparing .cproject to figure out if I can fix it.
> >
> >
> >> On 06/03/2009 11:39 AM, Mario Charest wrote:
> >>
> >>>> On 06/03/2009 11:02 AM, Mario Charest wrote:
> >>>>
> >>>>
> >>>
> >>>
> >>>> Did you somehow touch $(QNX_HOST)/etc/qcc directory?
> >>>>
> >>>>
> >>> Not that I'm aware of.  I ge theproblem on both Windows and Linux
> so I doubt
> >>>
> >>   I would have done it on two machines by mistake.
> >>
> >>>
> >>>
> >>>> Can you archive it  and send it to me?
> >>>>
> >>>>
> >>> While trying to create a scaled down version of the project I
> realized all
> >>>
> >> it needed was the .project and .cproject for the problem to show up.
> The
> >> problem happen on projects that I converted to C/C++ project about a
> month ago
> >> .  All the other projects that were created as C/C++ are ok.
> >>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> General
> >>> http://community.qnx.com/sf/go/post23793
> >>>
> >>>
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post25479
> >
> >
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post25484
>

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems