|
Mario Charest
08/17/2011 10:31 AM
post88159
|
There are some component of mylyn that I cannot install in the IDE5.0. It's the same situation as with IDE 4.8.
Cannot complete the install because one or more required items could not be found.
Software being installed: Mylyn Context Connector: C/C++ Development 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.
feature.group 5.2.301.v20110728-0200)
Missing requirement: Mylyn Context Connector: C/C++ Development 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.
group 5.2.301.v20110728-0200) requires 'org.eclipse.cdt.platform.feature.group 5.0.0' but it could not be found
With IDE 4.8 what you guys suggested to me, and it worked well, was to instead start from a clean install of Helios and
then install the QNX component afterward. Should I do the same with 5.0, is there a repository available?
|
|
|
|
|
|
Elena Laskavaia
08/17/2011 11:19 AM
post88163
|
Hmm, we don't include whole cdt - so main cdt feature is missing, I am not sure how to deal with that, mylyn should
probably not require the feature, only the plugins it needs...
On 08/17/2011 10:31 AM, Mario Charest wrote:
> There are some component of mylyn that I cannot install in the IDE5.0. It's the same situation as with IDE 4.8.
>
> Cannot complete the install because one or more required items could not be found.
> Software being installed: Mylyn Context Connector: C/C++ Development 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.
feature.group 5.2.301.v20110728-0200)
> Missing requirement: Mylyn Context Connector: C/C++ Development 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.
feature.group 5.2.301.v20110728-0200) requires 'org.eclipse.cdt.platform.feature.group 5.0.0' but it could not be found
>
> With IDE 4.8 what you guys suggested to me, and it worked well, was to instead start from a clean install of Helios
and then install the QNX component afterward. Should I do the same with 5.0, is there a repository available?
>
>
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post88159
>
|
|
|
|
|
|
Mario Charest
08/17/2011 11:23 AM
post88164
|
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 17 août 2011 11:20
> À : general-ide
> Objet : Re: IDE 5.0 + Mylyn
>
> Hmm, we don't include whole cdt - so main cdt feature is missing, I am not sure
> how to deal with that, mylyn should probably not require the feature, only the
> plugins it needs...
All I can tell you from my limited knowledge, if you get the C++ distribution of Eclipse, as found on the eclipse site,
Mylyn is included. As I said the solution to that same issue with Helios, was to get the Classic Helios packet and
then add the QNX plug-in via the repository. Since you didn`t say anything about me mention this in my OP I assume there
is no repository for the 5.0 stuff?
Thanks
>
> On 08/17/2011 10:31 AM, Mario Charest wrote:
> > There are some component of mylyn that I cannot install in the IDE5.0. It's the
> same situation as with IDE 4.8.
> >
> > Cannot complete the install because one or more required items could not be
> found.
> > Software being installed: Mylyn Context Connector: C/C++ Development
> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
> 5.2.301.v20110728-0200)
> > Missing requirement: Mylyn Context Connector: C/C++ Development
> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
> 5.2.301.v20110728-0200) requires 'org.eclipse.cdt.platform.feature.group
> 5.0.0' but it could not be found
> >
> > With IDE 4.8 what you guys suggested to me, and it worked well, was to
> instead start from a clean install of Helios and then install the QNX component
> afterward. Should I do the same with 5.0, is there a repository available?
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > General
> > http://community.qnx.com/sf/go/post88159
> >
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post88163
>
|
|
|
|
|
|
Elena Laskavaia
08/17/2011 11:40 AM
post88165
|
We can post update site for 5.0 in addition to IDE itself.
On 08/17/2011 11:23 AM, Mario Charest wrote:
>
>
>> -----Message d'origine-----
>> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
>> Envoyé : 17 août 2011 11:20
>> À : general-ide
>> Objet : Re: IDE 5.0 + Mylyn
>>
>> Hmm, we don't include whole cdt - so main cdt feature is missing, I am not sure
>> how to deal with that, mylyn should probably not require the feature, only the
>> plugins it needs...
>
> All I can tell you from my limited knowledge, if you get the C++ distribution of Eclipse, as found on the eclipse
site, Mylyn is included. As I said the solution to that same issue with Helios, was to get the Classic Helios packet
and then add the QNX plug-in via the repository. Since you didn`t say anything about me mention this in my OP I assume
there is no repository for the 5.0 stuff?
>
> Thanks
>
>>
>> On 08/17/2011 10:31 AM, Mario Charest wrote:
>>> There are some component of mylyn that I cannot install in the IDE5.0. It's the
>> same situation as with IDE 4.8.
>>>
>>> Cannot complete the install because one or more required items could not be
>> found.
>>> Software being installed: Mylyn Context Connector: C/C++ Development
>> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
>> 5.2.301.v20110728-0200)
>>> Missing requirement: Mylyn Context Connector: C/C++ Development
>> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
>> 5.2.301.v20110728-0200) requires 'org.eclipse.cdt.platform.feature.group
>> 5.0.0' but it could not be found
>>>
>>> With IDE 4.8 what you guys suggested to me, and it worked well, was to
>> instead start from a clean install of Helios and then install the QNX component
>> afterward. Should I do the same with 5.0, is there a repository available?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post88159
>>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post88163
>>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post88164
|
|
|
|
|
|
Mario Charest
08/18/2011 1:09 PM
post88205
|
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 17 août 2011 11:40
> À : general-ide
> Objet : Re: IDE 5.0 + Mylyn
>
> We can post update site for 5.0 in addition to IDE itself.
>
That would be lovely ;-) I`m really surprise you (QNX) didn`t get more complain about not being able to use Mylyn. It`
s an awesome tool, everybody here in the office is using it daily. A few of us use the beefed-up version of Mylyn;
Tasktop.
> On 08/17/2011 11:23 AM, Mario Charest wrote:
> >
> >
> >> -----Message d'origine-----
> >> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> >> Envoyé : 17 août 2011 11:20
> >> À : general-ide
> >> Objet : Re: IDE 5.0 + Mylyn
> >>
> >> Hmm, we don't include whole cdt - so main cdt feature is missing, I
> >> am not sure how to deal with that, mylyn should probably not require
> >> the feature, only the plugins it needs...
> >
> > All I can tell you from my limited knowledge, if you get the C++ distribution
> of Eclipse, as found on the eclipse site, Mylyn is included. As I said the
> solution to that same issue with Helios, was to get the Classic Helios packet
> and then add the QNX plug-in via the repository. Since you didn`t say
> anything about me mention this in my OP I assume there is no repository for
> the 5.0 stuff?
> >
> > Thanks
> >
> >>
> >> On 08/17/2011 10:31 AM, Mario Charest wrote:
> >>> There are some component of mylyn that I cannot install in the
> >>> IDE5.0. It's the
> >> same situation as with IDE 4.8.
> >>>
> >>> Cannot complete the install because one or more required items could
> >>> not be
> >> found.
> >>> Software being installed: Mylyn Context Connector: C/C++
> >>> Development
> >> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
> >> 5.2.301.v20110728-0200)
> >>> Missing requirement: Mylyn Context Connector: C/C++ Development
> >> 5.2.301.v20110728-0200 (org.eclipse.cdt.mylyn.feature.group
> >> 5.2.301.v20110728-0200) requires
> >> 'org.eclipse.cdt.platform.feature.group
> >> 5.0.0' but it could not be found
> >>>
> >>> With IDE 4.8 what you guys suggested to me, and it worked well, was
> >>> to
> >> instead start from a clean install of Helios and then install the QNX
> >> component afterward. Should I do the same with 5.0, is there a
> repository available?
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>>
> >>> General
> >>> http://community.qnx.com/sf/go/post88159
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> General
> >> http://community.qnx.com/sf/go/post88163
> >>
> >
> >
> >
> >
> > _______________________________________________
> >
> > General
> > http://community.qnx.com/sf/go/post88164
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post88165
|
|
|
|
|
|
Mario Charest
02/23/2012 10:37 AM
post91735
|
I just the lastest version from Feb 2012 and I still can't install Mylyn:
Cannot complete the install because one or more required items could not be found.
Software being installed: Mylyn Context Connector: C/C++ Development 5.2.304.v20111118-0100 (org.eclipse.cdt.mylyn.
feature.group 5.2.304.v20111118-0100)
Missing requirement: Mylyn Context Connector: C/C++ Development 5.2.304.v20111118-0100 (org.eclipse.cdt.mylyn.feature.
group 5.2.304.v20111118-0100) requires 'org.eclipse.cdt.platform.feature.group 5.0.0' but it could not be found
Is that something QSSL will "fix" at some point or if it is the way it's going to be. While I'm at it I would also like
the ability to uninstall the SVN Polarion stuff. The reason is that they aren't keeping uptodate with the latest
version of SVN ( 1.7 ). I'v switch to subclipse and I'm starting to like it ;-) Note that I was able to manually remove
the Polarion stuff so at least I can deal with it.
Has the QNX update site been update with the latest version. At the moment http://community.qnx.com/sf/frs/do/
viewRelease/projects.ide/frs.ide_5_0.ide_5_0 is unreachable.
Thanks a bunch.
|
|
|
|
|
|
Elena Laskavaia
02/23/2012 1:34 PM
post91748
|
Are you running run_qde_admin script? Because you need to run it instead or regular run_qde to install updates in IDE
|
|
|
|
|
|
Mario Charest
02/23/2012 1:40 PM
post91749
|
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 23 février 2012 13:34
> À : general-ide
> Objet : Re: IDE 5.0 + Mylyn
>
> Are you running run_qde_admin script? Because you need to run it instead
> or regular run_qde to install updates in IDE
I assuming this is a Linux thingy? I`m using Windows. I try running qde.exe in Administration Mode but no change.
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post91748
>
|
|
|
|
|
|
Mario Charest
03/01/2012 5:04 PM
post91884
|
> Are you running run_qde_admin script? Because you need to run it instead or
> regular run_qde to install updates in IDE
Trying with the Momentics Administrative mode (in Windows), it's still a no go.
Cheers.
|
|
|
|
|
|
Elena Laskavaia
03/02/2012 12:52 PM
post91893
|
I think Mylyn has dependency bug, we will try to send them a bug report about it. The only hack around I can think about
is try to install cdt feature from eclipse first (we would need 8.0.2)
|
|
|
|
|
|
Mario Charest
03/02/2012 1:09 PM
post91894
|
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 2 mars 2012 12:53
> À : general-ide
> Objet : Re: IDE 5.0 + Mylyn
>
> I think Mylyn has dependency bug, we will try to send them a bug report
> about it. The only hack around I can think about is try to install cdt feature
> from eclipse first (we would need 8.0.2)
>
Ok thanks. I though I could copy the missing feature from my helios setup to 5.0 but I can`t even find the component
that mylyn is complaining about , in the Helios setup.
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post91893
>
|
|
|
|
|
|
Elena Laskavaia
03/02/2012 1:12 PM
post91895
|
Helios? I thought 5.0 is Indigo based
|
|
|
|
|
|
Mario Charest
03/02/2012 1:16 PM
post91896
|
Sorry I meant Indigo.
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 2 mars 2012 13:12
> À : general-ide
> Objet : Re: RE: IDE 5.0 + Mylyn
>
> Helios? I thought 5.0 is Indigo based
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post91895
>
|
|
|
|
|
|
Elena Laskavaia
03/02/2012 1:23 PM
post91897
|
Can you just install main CDT feature? I think it wants that
On 03/02/2012 01:16 PM, Mario Charest wrote:
>
> Sorry I meant Indigo.
>
>
>> -----Message d'origine-----
>> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
>> Envoyé : 2 mars 2012 13:12
>> À : general-ide
>> Objet : Re: RE: IDE 5.0 + Mylyn
>>
>> Helios? I thought 5.0 is Indigo based
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post91895
>>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post91896
|
|
|
|
|
|
Mario Charest
03/02/2012 1:54 PM
post91898
|
> -----Message d'origine-----
> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> Envoyé : 2 mars 2012 13:23
> À : general-ide
> Objet : Re: IDE 5.0 + Mylyn
>
> Can you just install main CDT feature? I think it wants that
>
From the Indigo site?
> On 03/02/2012 01:16 PM, Mario Charest wrote:
> >
> > Sorry I meant Indigo.
> >
> >
> >> -----Message d'origine-----
> >> De : Elena Laskavaia [mailto:community-noreply@qnx.com]
> >> Envoyé : 2 mars 2012 13:12
> >> À : general-ide
> >> Objet : Re: RE: IDE 5.0 + Mylyn
> >>
> >> Helios? I thought 5.0 is Indigo based
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> General
> >> http://community.qnx.com/sf/go/post91895
> >>
> >
> >
> >
> >
> > _______________________________________________
> >
> > General
> > http://community.qnx.com/sf/go/post91896
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post91897
|
|
|
|
|
|
Mario Charest
03/08/2012 12:12 PM
post91982
|
> > Can you just install main CDT feature? I think it wants that
> >
>
> From the Indigo site?
Tried that but I end up with gazzillion of broken dependencies. Just for the record the problem is the same with IDE 4.
7.0 and UP. I think it worked with 4.6.x but I don't have access to it to confirm.
Did you manage to make a bug report to the eclipse/mylyn group, any bug number?
|
|
|
|
|
|
