Brian Stecher
05/30/2008 9:23 AM
post8593
|
On Thu, May 29, 2008 at 03:37:57PM -0400, Mario Charest wrote:
>
> I have setup a machine with M6 ( vmware ) . I copied the .boot file
generated from the M6 machine, on a real machine running 6.3.2.
>
> After a few minutes into the first compilation of a big project, the
kernel dumped. I don't have any more info then this at the moment. That
machine has been running 6.3.2 for a few months with no problem.
>
> The 6.3.2 machine only has the boot file from 6.4M6 the rest was left
untouch.
>
> What info would you need?
The shutdown screen and the procnto*.sym file (you get that by adding
"[+keeplinked]" to the procnto line in the mkifs build file).
Brian
--
Brian Stecher (bstecher@qnx.com) QNX Software Systems
phone: +1 (613) 591-0931 (voice) 175 Terence Matthews Cr.
+1 (613) 591-3579 (fax) Kanata, Ontario, Canada K2M 1W8
|
|
|