Jon Wallace
|
Re: qconfig.mk file disappears after installing the 6.5 service pack
|
Jon Wallace
11/24/2012 3:57 PM
post97435
|
Re: qconfig.mk file disappears after installing the 6.5 service pack
The link is still there and it points to the right spot, but the actual file in include/mk is gone. I installed the
service pack with the -E on sudo as well. I don't have my laptop with me but I'll post my env vars the next chance I get
.
I tried compiling the BSP (beagle bone) without the service pack and it worked fine. I could back that folder up and
install the service pack but I have no idea what else might be breaking...
> Is /opt/qnx650/target/qnx6/usr/include/qconfig.mk missing?
>
>
> It should be a link to mk/qconf-linux.mk
>
> Also check you env vars;
>
> QNX_HOST
> QNX_TARGET
> MAKEFLAGS
> PATH
>
>
> Sent from my BB
>
> ----- Original Message -----
> From: Jon Wallace [mailto:community-noreply@qnx.com]
> Sent: Saturday, November 24, 2012 04:15 AM
> To: momenticsgs-community <momenticsgs-community@community.qnx.com>
> Subject: qconfig.mk file disappears after installing the 6.5 service pack
>
> I'm just getting my environment set up for the first time, I'm completely new
> to QnX but I've been really impressed with the level of documentation so far.
> There's one roadblock that I haven't been able to find an answer to by
> searching QnX, Foundry, or the whole internet: I can't build my bsp because
> the make system can't find qconfig.mk. I checked out my /opt/qnx650/target/
> qnx6/usr/include/mk directory and this is what I see:
>
> jon@jon-netbook:/opt/qnx650/target/qnx6/usr/include/mk$ ls
> nto_mips.mk
>
> Clearly there should be a lot more. So I uninstalled the SDP and re-installed
> (I used sudo -E on the package this time, I left out the E flag the first time
> and I thought I might as well try that) Well after doing that, I checked the
> target include files again and lo and behold:
>
> jon@jon-netbook:/opt/qnx650/target/qnx6/usr/include/mk$ ls
> ab.mk makepriv-qnx ntoxdev.mk qconf-nto.mk qrules.mk
> build-cfg makepriv-unix os_linux.mk qconf-win32.mk qtargets.mk
> buildlist.mk nto_arm.mk os_nto.mk qdepfile.mk recurse.mk
> flist-unix nto_mips.mk os_win32.mk qlevel.mk
> flist-win32 nto_ppc.mk phapps.mk qmacros.mk
> linux_x86.mk nto_sh.mk prod_utils.mk qmake-cfg.mk
> makepriv-nt.bat nto_x86.mk qconf-linux.mk qphabtarg.mk
>
> At this point I thought I was in the clear so I installed the service pack and
> went to build my bsp again and I got the same error! No qconfig.mk. So I went
> back the the includes directory and it was back to the way it was the first
> time. It seems like the service pack installer is clobbering that folder on my
> host. Has anyone seen this before?
>
> Here's the file names for each installer, they look like they have build dates
> /numbers so I'm hoping its helpful
>
> Main:
> qnxsdp-6.5.0-201007091524-linux.bin
> Service Pack:
> qnxsdp-6.5.0SP1-201206271006-linux.bin
>
> My system:
> Linux jon-netbook 3.2.0-33-generic-pae #52-Ubuntu SMP Thu Oct 18 16:39:21 UTC
> 2012 i686 i686 i386 GNU/Linux
> Ubuntu 12.04 LTS
>
> Thanks in advance!
>
>
>
>
> _______________________________________________
>
> QNX Momentics Getting Started
> http://community.qnx.com/sf/go/post97432
> To cancel your subscription to this discussion, please e-mail momenticsgs-
> community-unsubscribe@community.qnx.com
|
|
|
Jon Wallace
|
Re: qconfig.mk file disappears after installing the 6.5 service pack
|
Jon Wallace
11/26/2012 8:22 PM
post97470
|
Re: qconfig.mk file disappears after installing the 6.5 service pack
QNX_TARGET=/opt/qnx650/target/qnx6
QNX_HOST=/opt/qnx650/host/linux/x86
PATH=/usr/lib/lightdm/lightdm:
/usr/local/sbin:
/usr/local/bin:
/usr/sbin:
/usr/bin:
/sbin:
/bin:
/usr/games:
/opt/qnx650/host/linux/x86/usr/bin:
/etc/qnx/bin
MAKEFLAGS=-I/opt/qnx650/target/qnx6/usr/include
I don't know for sure, but these all look good to me
|
|
|