Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX Momentics Community Support/qconn in QNX 6.4.1/List of Posts
Forum Topic - qconn in QNX 6.4.1: (7 Items)
   
Update
Sunil Keshava(deleted)
04/08/2010 8:12 AM
post51321
qconn in QNX 6.4.1   
Hello,

I have a MIPSLE card running on QNX 6.4.1. The network driver is an io-net driver which is run using devn-shim (shim 
layer) with io-pkt-v4. I do not see any problems while loading the network drivers and there are no problems with 
assigning IP addresses as well. 

But when I start qconn and try to see the folder structure on IDE, then I can only see the folders but not the files 
present in the folders. 

The same board was earlier running on 6.2.1 and it did not have any problem then. I am wondering if this is a network 
driver issue.

Regards
Sunil
Elena Laskavaia
04/08/2010 9:07 AM
post51324
Re: qconn in QNX 6.4.1   
You are using TFSN view? And right side has folder and left side is empty?

Sunil Keshava wrote:
> Hello,
>
> I have a MIPSLE card running on QNX 6.4.1. The network driver is an io-net driver which is run using devn-shim (shim 
layer) with io-pkt-v4. I do not see any problems while loading the network drivers and there are no problems with 
assigning IP addresses as well. 
>
> But when I start qconn and try to see the folder structure on IDE, then I can only see the folders but not the files 
present in the folders. 
>
> The same board was earlier running on 6.2.1 and it did not have any problem then. I am wondering if this is a network 
driver issue.
>
> Regards
> Sunil
>
>
>
> _______________________________________________
>
> QNX Momentics Community Support
> http://community.qnx.com/sf/go/post51321
>
>
Sunil Keshava(deleted)
04/11/2010 2:15 AM
post51436
Re: qconn in QNX 6.4.1   
Yes I am using TFSN view. The left side displays the file system folders but the right side, which is supposed to 
display all files that are present in the folders is blank.

I have attached an image of TFSN to this post. Please take at look at it.
Attachment: Image Image.JPG 17.29 KB
Andy Jin(deleted)
04/11/2010 10:26 PM
post51441
Re: qconn in QNX 6.4.1   
Check to see if you have select any table option in the view option drop down menu "Table parameters".
Sunil Keshava(deleted)
04/12/2010 5:36 AM
post51451
Re: qconn in QNX 6.4.1   
I have all table options selected on my IDE.

I noticed that there is a "Show Files in tree" option and if this is selected then the files appear below the folder in 
a tree format (see attached image) but the files are not displayed on the right hand side of TFSN.
Attachment: Image Image2.JPG 22.31 KB
Elena Laskavaia
04/12/2010 11:10 AM
post51474
RE: qconn in QNX 6.4.1   
This is bug where all columns were reset to 0 size for some reason. 
Check all columns again in Table preferences and click Apply - they
should appear 

-----Original Message-----
From: Sunil Keshava [mailto:community-noreply@qnx.com] 
Sent: April 12, 2010 5:37 AM
To: momentics-community
Subject: Re: qconn in QNX 6.4.1

I have all table options selected on my IDE.

I noticed that there is a "Show Files in tree" option and if this is
selected then the files appear below the folder in a tree format (see
attached image) but the files are not displayed on the right hand side
of TFSN.



_______________________________________________

QNX Momentics Community Support
http://community.qnx.com/sf/go/post51451
Sunil Keshava(deleted)
05/03/2010 6:03 AM
post53395
Re: RE: qconn in QNX 6.4.1   
Thanks for the info Elena. 

I tried what you said and it worked.

Regards
Sunil

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems