Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/QNX425 on PCs HP compaq/List of Posts
Forum Topic - QNX425 on PCs HP compaq: (8 Items)
   
Update
nose quien
07/21/2009 11:24 AM
post34209
QNX425 on PCs HP compaq   
We need to install QNX4.25 on HP Compaq dc5850 PC with ATI Radeon 3100 video and Broadcom BCM5754 network. The Net.
bcm57xx driver does not support the 5754 chip. If you run with parameter-d167A (0x167A is the Device ID), after 55 
seconds it prints "no VPD", but work properly, perhaps.The Pg.Radeon video driver does not support the model 3100. 
Do you know of any updates or what parameters can I use?
Hugh Brown
07/21/2009 11:41 AM
post34214
RE: QNX425 on PCs HP compaq   
Please try the attached network driver and let me know if it works.

Thanks, Hugh.

-----Original Message-----
From: nose quien [mailto:community-noreply@qnx.com] 
Sent: Tuesday, July 21, 2009 11:25 AM
To: qnx4-community
Subject: QNX425 on PCs HP compaq

We need to install QNX4.25 on HP Compaq dc5850 PC with ATI Radeon 3100
video and Broadcom BCM5754 network. The Net.bcm57xx driver does not
support the 5754 chip. If you run with parameter-d167A (0x167A is the
Device ID), after 55 seconds it prints "no VPD", but work properly,
perhaps.The Pg.Radeon video driver does not support the model 3100. 
Do you know of any updates or what parameters can I use?




_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post34209
Attachment: Text Net.bcm57xx 48.1 KB
Fausto Espinillo(deleted)
07/22/2009 4:23 PM
post34347
Re: RE: QNX425 on PCs HP compaq   
Hugh, thanks you very much by help us
We can use your driver, it didn´t need the parameter -d to run, but it works like the another, after of 55 seconds it 
prints "No VPD" and starts
Hugh Brown
07/23/2009 8:01 AM
post34386
RE: RE: QNX425 on PCs HP compaq   
I have no idea why the driver is taking 55 seconds to start up. The "No VPD" message is just a warning. There is not 
much that I can do about the driver without the hardware.

Hugh.

-----Original Message-----
From: Fausto Espinillo [mailto:community-noreply@qnx.com] 
Sent: Wednesday, July 22, 2009 4:23 PM
To: qnx4-community
Subject: Re: RE: QNX425 on PCs HP compaq

Hugh, thanks you very much by help us
We can use your driver, it didn´t need the parameter -d to run, but it works like the another, after of 55 seconds it 
prints "No VPD" and starts



_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post34347
Fausto Espinillo(deleted)
07/27/2009 3:59 PM
post34670
Re: RE: RE: QNX425 on PCs HP compaq   
The PC is a HP compaq dc5850 Microtower
We run the driver with -s100 -v parameters, and it prints:

Net-bcm57xx: PCI-Express Card (b002)
I/O port base ...... 0xf0400000
Interrupt ........... 5
Net.bcm57xx:   Actuve PHY :  5787
.
.
50 sec.
.
.
Net.bcm57xx:  No VPD
Net.bcm57xx:  Link down
buffer stuck at 318!
Net.bcm57xx:  Link up


Maybe this information could be usefull
Thank's anyway
Michael Van Reenen
07/21/2009 1:32 PM
post34232
RE: QNX425 on PCs HP compaq   
There is no updated graphics driver for this chipset.   It may work with
one of the generic drivers but I can't say for sure as we haven't tried
it here.


-----Original Message-----
From: nose quien [mailto:community-noreply@qnx.com] 
Sent: July 21, 2009 11:25 AM
To: qnx4-community
Subject: QNX425 on PCs HP compaq

We need to install QNX4.25 on HP Compaq dc5850 PC with ATI Radeon 3100
video and Broadcom BCM5754 network. The Net.bcm57xx driver does not
support the 5754 chip. If you run with parameter-d167A (0x167A is the
Device ID), after 55 seconds it prints "no VPD", but work properly,
perhaps.The Pg.Radeon video driver does not support the model 3100. 
Do you know of any updates or what parameters can I use?




_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post34209
Fausto Espinillo(deleted)
07/21/2009 7:22 PM
post34277
Re: RE: QNX425 on PCs HP compaq   
that´s rigth, we found that Hydra.ms and Pg.flatdc32 work with good resolution but very slowly. We´ll try to change 
the parameters.
Thanks you very much!
Fausto Espinillo(deleted)
08/07/2009 8:10 AM
post35440
Re: RE: QNX425 on PCs HP compaq   
Hi,
We don´t get good results with generic drivers
We can use video devices PCIe added

Could you recommend some graphic device of the market ?

Thank´s

Fausto

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems