Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/Intel 82566 Network Controller/List of Posts
Forum Topic - Intel 82566 Network Controller: Page 1 of 2 (28 Items)
   
Update
avinash maharaj
06/29/2009 9:03 AM
post32698
Intel 82566 Network Controller   
Hi There i am new to the QNX world. 

I have a server that has the intel 82566 onboard network card. which driver would i need to use ( Net.i82540 or Net.
e1000). Also what should the setting be to load this card.

I have attached show_pci -vv
Attachment: Text showpci.txt 43.98 KB
Hugh Brown
06/29/2009 9:09 AM
post32700
RE: Intel 82566 Network Controller   
You should run the Net.e1000 driver for this chipset. You don't need any
command line parameters, just run:
Net &
Net.e1000 &



-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Monday, June 29, 2009 9:04 AM
To: qnx4-community
Subject: Intel 82566 Network Controller

Hi There i am new to the QNX world. 

I have a server that has the intel 82566 onboard network card. which
driver would i need to use ( Net.i82540 or Net.e1000). Also what should
the setting be to load this card.

I have attached show_pci -vv

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32698
avinash maharaj
06/29/2009 9:16 AM
post32702
Re: Intel 82566 Network Controller   
could i please get the latest copy of this driver.

Thanks
Hugh Brown
06/29/2009 9:22 AM
post32703
RE: Intel 82566 Network Controller   
I have attached the latest driver as well as netinfo.


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Monday, June 29, 2009 9:16 AM
To: qnx4-community
Subject: Re: Intel 82566 Network Controller

could i please get the latest copy of this driver.

Thanks


_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32702
Attachment: Text Net.e1000 138.75 KB Text netinfo 210.38 KB
avinash maharaj
06/29/2009 9:41 AM
post32711
Re: Intel 82566 Network Controller   
Hi Hugh

I have loaded the driver provided, it loads without any errors but after about 5 seconds it reboots the pc.
Hugh Brown
06/29/2009 10:49 AM
post32729
RE: Intel 82566 Network Controller   
I have no idea why your machine is rebooting. Please can you supply the
output from 'sin' and 'sin ver'?

Thanks.

-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Monday, June 29, 2009 9:42 AM
To: qnx4-community
Subject: Re: Intel 82566 Network Controller

Hi Hugh

I have loaded the driver provided, it loads without any errors but after
about 5 seconds it reboots the pc.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32711
avinash maharaj
06/30/2009 4:15 AM
post32800
Re: RE: Intel 82566 Network Controller   
Hi Hugh

Attached is dumps as requested.
Attachment: Text sin_ve.txt 805 bytes
avinash maharaj
06/30/2009 4:16 AM
post32801
Re: RE: Intel 82566 Network Controller   
here is the sin dump
Attachment: Text sin.txt 1.4 KB
Hugh Brown
06/30/2009 7:57 AM
post32808
RE: RE: Intel 82566 Network Controller   
You are running a very old version of QNX4. Is it possible for you to
upgrade to the latest?


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 4:15 AM
To: qnx4-community
Subject: Re: RE: Intel 82566 Network Controller

Hi Hugh

Attached is dumps as requested.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32800
avinash maharaj
06/30/2009 10:13 AM
post32830
Re: RE: RE: Intel 82566 Network Controller   
This will be difficult. This is currently run as a point of sale server. We have had a hardware change ( new 
motherboard) that has brought about this dilemma. Also if we upgarde to the latest version i am not sure what impact 
this will have on the code that we run. I am not responsible for the code we have an out source partner and due to time 
constraints for new store rollouts i do not really have time to put in a pilot site.

I have an option of using a "realtek 8139d" chipset nic. Could you forward me the latest drivers for this card.
Hugh Brown
06/30/2009 10:20 AM
post32831
RE: RE: RE: Intel 82566 Network Controller   
You could always just do a test with the latest version of QNX4 to see
whether the problem lies with the version of QNX4 or the driver. If the
problem is with the driver, then if you could send us a board, we could
take a look at it.

I have attached the latest Net.rtl driver.


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 10:13 AM
To: qnx4-community
Subject: Re: RE: RE: Intel 82566 Network Controller

This will be difficult. This is currently run as a point of sale server.
We have had a hardware change ( new motherboard) that has brought about
this dilemma. Also if we upgarde to the latest version i am not sure
what impact this will have on the code that we run. I am not responsible
for the code we have an out source partner and due to time constraints
for new store rollouts i do not really have time to put in a pilot site.

I have an option of using a "realtek 8139d" chipset nic. Could you
forward me the latest drivers for this card.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32830
Attachment: Text Net.rtl 45.4 KB
avinash maharaj
06/30/2009 10:22 AM
post32832
Re: RE: RE: RE: Intel 82566 Network Controller   
How would i upgrade to the latest version?
Hugh Brown
06/30/2009 10:36 AM
post32836
RE: RE: RE: RE: Intel 82566 Network Controller   
There is a download section on our web site with the 4.25 patch G.


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 10:22 AM
To: qnx4-community
Subject: Re: RE: RE: RE: Intel 82566 Network Controller

How would i upgrade to the latest version?

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32832
avinash maharaj
06/30/2009 11:50 AM
post32850
Re: RE: RE: RE: RE: Intel 82566 Network Controller   
i have downloaded this patch but much to my frustration i can not extract this info. I do not have photon. Is there 
another utility that i could use.
Hugh Brown
06/30/2009 12:58 PM
post32859
RE: RE: RE: RE: RE: Intel 82566 Network Controller   
I think that you need to have the installation CD to install the patch.


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 11:51 AM
To: qnx4-community
Subject: Re: RE: RE: RE: RE: Intel 82566 Network Controller

i have downloaded this patch but much to my frustration i can not
extract this info. I do not have photon. Is there another utility that i
could use.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32850
avinash maharaj
06/30/2009 11:14 AM
post32844
Re: RE: RE: RE: Intel 82566 Network Controller   
Hi Hugh

I have run nettrap to pick up the card which it did 
Found a Realtek 8139 ethernet card , i/o port at 2000, IRQ 10
Command : Net.rtl -I0 -l1 &

when i run the above command i get error message
DriverInit: Unablle to locate adapter

Do you have any thoughts on this.
Hugh Brown
06/30/2009 11:22 AM
post32847
RE: RE: RE: RE: Intel 82566 Network Controller   
Please can you post the output from 'show_pci -v' again?

Thanks, Hugh.

-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 11:14 AM
To: qnx4-community
Subject: Re: RE: RE: RE: Intel 82566 Network Controller

Hi Hugh

I have run nettrap to pick up the card which it did 
Found a Realtek 8139 ethernet card , i/o port at 2000, IRQ 10
Command : Net.rtl -I0 -l1 &

when i run the above command i get error message
DriverInit: Unablle to locate adapter

Do you have any thoughts on this.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32844
avinash maharaj
06/30/2009 11:28 AM
post32848
Re: RE: RE: RE: RE: Intel 82566 Network Controller   
here is the show_pci with the realtek card in.
Attachment: Text showpci_rtl.txt 25.01 KB
Hugh Brown
06/30/2009 11:46 AM
post32849
RE: RE: RE: RE: RE: Intel 82566 Network Controller   
Please run the attached debug driver and let me know what it displays on
the screen.

Thanks, Hugh.

-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 11:28 AM
To: qnx4-community
Subject: Re: RE: RE: RE: RE: Intel 82566 Network Controller

here is the show_pci with the realtek card in.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32848
Attachment: Text Net.rtl 45.61 KB
avinash maharaj
06/30/2009 11:59 AM
post32852
Re: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
Displays 
rtl_Verify - IoBase 0 - Index 0
BusNo 0 - DevNo 0
rtl_Verify 2
DriverInit: Unable to locate adapter
Hugh Brown
06/30/2009 1:08 PM
post32860
RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
I think that the problem lies in the fact that I am compiling with the
latest version of QNX and you are running an older version. The nettrap
utility uses the same logic to locate the adapter as the driver, so I
guess that is why you are having problems with both drivers.

Are you running QNX 4.24?


-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 12:00 PM
To: qnx4-community
Subject: Re: RE: RE: RE: RE: RE: Intel 82566 Network Controller

Displays 
rtl_Verify - IoBase 0 - Index 0
BusNo 0 - DevNo 0
rtl_Verify 2
DriverInit: Unable to locate adapter

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32852
Hugh Brown
06/30/2009 1:53 PM
post32865
RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
I'm not sure what is going on with your machine! I have just loaded
QNX4.24 on a machine and run the driver without any problem.

Hugh.

-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 12:00 PM
To: qnx4-community
Subject: Re: RE: RE: RE: RE: RE: Intel 82566 Network Controller

Displays 
rtl_Verify - IoBase 0 - Index 0
BusNo 0 - DevNo 0
rtl_Verify 2
DriverInit: Unable to locate adapter

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32852
avinash maharaj
06/30/2009 3:03 PM
post32880
Re: RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
Hi Hugh 

We are running 4.24. The version that you have installed does that include 4.25 patch G.
Hugh Brown
06/30/2009 3:10 PM
post32881
RE: RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
No, I just did a plain 4.24 install without any patches.

Hugh.

-----Original Message-----
From: avinash maharaj [mailto:community-noreply@qnx.com] 
Sent: Tuesday, June 30, 2009 3:03 PM
To: qnx4-community
Subject: Re: RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller

Hi Hugh 

We are running 4.24. The version that you have installed does that
include 4.25 patch G.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post32880
avinash maharaj
07/02/2009 4:35 AM
post32943
Re: RE: RE: RE: RE: RE: RE: RE: Intel 82566 Network Controller   
Hi Hugh

I beleive that the problem lies with the new motherboard. Because i have put the realtek card in my previous server and 
it loads fine.

If we need to send you a motherboard. What is the process that needs to be followed. Also are there any costs involved 
in this certification exercise.
12Next

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems