Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/Net.rtl8169 not work on second interface/List of Posts
Forum Topic - Net.rtl8169 not work on second interface: (4 Items)
   
Update
Alex Burk(deleted)
04/26/2012 7:18 AM
post92743
Net.rtl8169 not work on second interface   
Hi ! 

motherboard SA22BR16 has two realtek network device ( vid=10ec,did=8168)

Net.rtl8169 -I0 -l1 &
Net.rtl8169 -I1 -l2 &

First interface ( on l1 ) work well.

Second ( on l2 ) has problem : FIFO Overruns During Rx .
Can't connect  to any station on net.
The SEND possibly works ( i see  mac address in netmap of partner) .

Net.rtl8169  from 05.05.2011.

Does  anybody have new version ?

Alexander
Hugh Brown
04/27/2012 7:50 AM
post92755
Re: Net.rtl8169 not work on second interface   
Here's the latest driver for you to try.

-- 
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931







On 12-04-26 7:18 AM, "Alex Burk" <community-noreply@qnx.com> wrote:

>Hi ! 
>
>motherboard SA22BR16 has two realtek network device ( vid=10ec,did=8168)
>
>Net.rtl8169 -I0 -l1 &
>Net.rtl8169 -I1 -l2 &
>
>First interface ( on l1 ) work well.
>
>Second ( on l2 ) has problem : FIFO Overruns During Rx .
>Can't connect  to any station on net.
>The SEND possibly works ( i see  mac address in netmap of partner) .
>
>Net.rtl8169  from 05.05.2011.
>
>Does  anybody have new version ?
>
>Alexander
>
>
>
>
>
>_______________________________________________
>
>QNX4 Community Support
>http://community.qnx.com/sf/go/post92743
>
Attachment: Text Net.rtl8169 184.01 KB
Alex Burk(deleted)
05/03/2012 7:56 AM
post92892
Re: Net.rtl8169 not work on second interface   
There is  no difference :(((
And netsniff  is silent  on the l2 interface (no packets - and in promiscuous mode too).

---------------------------------------------------------------------

There is a second problem. Driver not work  if interface connected to 10Mbit HUB  ( Cabletron ).
 Auto-negotiate is not work - nicinfo show:  Media Rate -0Mb/s  HDX
 "Net.rtl8169 -s10 -v"   not work too - Link Down.
 At the same time netsniff shows broadcast packets from Windows stations.

Alexander
Hugh Brown
05/03/2012 3:07 PM
post92903
Re: Net.rtl8169 not work on second interface   
Unfortunately there isn't much that I can do about this without the
hardware, as we don't have this particular version of the 8169 chipset.

-- 
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931







On 12-05-03 7:56 AM, "Alex Burk" <community-noreply@qnx.com> wrote:

>
>There is  no difference :(((
>And netsniff  is silent  on the l2 interface (no packets - and in
>promiscuous mode too).
>
>---------------------------------------------------------------------
>
>There is a second problem. Driver not work  if interface connected to
>10Mbit HUB  ( Cabletron ).
> Auto-negotiate is not work - nicinfo show:  Media Rate -0Mb/s  HDX
> "Net.rtl8169 -s10 -v"   not work too - Link Down.
> At the same time netsniff shows broadcast packets from Windows stations.
>
>Alexander
>
>
>
>_______________________________________________
>
>QNX4 Community Support
>http://community.qnx.com/sf/go/post92892
>To cancel your subscription to this discussion, please e-mail
>qnx4-community-unsubscribe@community.qnx.com

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems