|
Brad Anderson(deleted)
|
issue with copying/ftp files in virtual environment
|
|
Brad Anderson(deleted)
12/13/2011 8:57 AM
post90575
|
issue with copying/ftp files in virtual environment
I have recently setup a virtual environment with four quest QNX 4.25 O/S and when I am trying to copy files between
NODES it errors out stating:
cp: write (//1///[filename]): Interrupted function call
cp: close (//1///[filename]): Bad file descriptor
When I FTP I get I get similiar results.....it just hangs and then finally times out.
Any assistance I can get to try and get this resolved would be great.
|
|
|
|
|
|
Oleg Bolshakov
|
issue with copying/ftp files in virtual environment
|
|
Oleg Bolshakov
12/14/2011 10:38 AM
post90619
|
issue with copying/ftp files in virtual environment
Hi Brad,
Please, send us output of following commands (from two QNX nodes):
# sin in > sin_in.txt
# sin ar > sin_ar.txt
# sin ver > sin_ver.txt
# netmap > netmap.txt
# netinfo -l > netinfo.txt
What is your virtual environment?
--
Respectfully,
Oleg
> I have recently setup a virtual environment with four quest QNX 4.25 O/S and
when I am trying to copy files between NODES it errors out stating:
>
> cp: write (//1///[filename]): Interrupted function call
> cp: close (//1///[filename]): Bad file descriptor
>
> When I FTP I get I get similiar results.....it just hangs and then finally
times out.
>
> Any assistance I can get to try and get this resolved would be great.
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90575
>
|
|
|
|
|
|
Brad Anderson(deleted)
|
Re: issue with copying/ftp files in virtual environment
|
|
Brad Anderson(deleted)
12/14/2011 2:11 PM
post90629
|
Re: issue with copying/ftp files in virtual environment
Hi Oleg,
I have attached the files as requested---hope this helps.
And the Virtual Environment we are using is VMware vSphere 5.0
Thank you,
Brad Anderson
INTERPRO Technology, Inc.
Office: 248-650-8695
-----Original Message-----
From: Oleg Bolshakov
Sent: Wednesday, December 14, 2011 10:38 AM
To: qnx4-community
Subject: issue with copying/ftp files in virtual environment
Hi Brad,
Please, send us output of following commands (from two QNX nodes):
# sin in > sin_in.txt
# sin ar > sin_ar.txt
# sin ver > sin_ver.txt
# netmap > netmap.txt
# netinfo -l > netinfo.txt
What is your virtual environment?
--
Respectfully,
Oleg
> I have recently setup a virtual environment with four quest QNX 4.25 O/S
> and
when I am trying to copy files between NODES it errors out stating:
>
> cp: write (//1///[filename]): Interrupted function call
> cp: close (//1///[filename]): Bad file descriptor
>
> When I FTP I get I get similiar results.....it just hangs and then finally
times out.
>
> Any assistance I can get to try and get this resolved would be great.
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90575
>
_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post90619
|
|
|
|
|
|
Oleg Bolshakov
|
Re: issue with copying/ftp files in virtual environment
|
|
Oleg Bolshakov
12/16/2011 3:07 AM
post90657
|
Re: issue with copying/ftp files in virtual environment
Hi Brad,
I see nothing wrong in your QNX configuration. Unfortunately, we don't use here
the VMware vSphere 5.0. Can you test your QNX guests with VMWare Workstation?
--
Respectfully,
Oleg
> Hi Oleg,
>
> I have attached the files as requested---hope this helps.
>
> And the Virtual Environment we are using is VMware vSphere 5.0
>
>
> Thank you,
>
> Brad Anderson
> INTERPRO Technology, Inc.
> Office: 248-650-8695
>
>
> -----Original Message-----
> From: Oleg Bolshakov
> Sent: Wednesday, December 14, 2011 10:38 AM
> To: qnx4-community
> Subject: issue with copying/ftp files in virtual environment
>
> Hi Brad,
>
> Please, send us output of following commands (from two QNX nodes):
>
> # sin in > sin_in.txt
> # sin ar > sin_ar.txt
> # sin ver > sin_ver.txt
> # netmap > netmap.txt
> # netinfo -l > netinfo.txt
>
> What is your virtual environment?
>
> --
> Respectfully,
> Oleg
>
> > I have recently setup a virtual environment with four quest QNX 4.25 O/S
> > and
> when I am trying to copy files between NODES it errors out stating:
> >
> > cp: write (//1///[filename]): Interrupted function call
> > cp: close (//1///[filename]): Bad file descriptor
> >
> > When I FTP I get I get similiar results.....it just hangs and then finally
> times out.
> >
> > Any assistance I can get to try and get this resolved would be great.
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post90575
> >
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90619
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90629
|
|
|
|
|
|
Brad Anderson(deleted)
|
Re: issue with copying/ftp files in virtual environment
|
|
Brad Anderson(deleted)
12/16/2011 8:49 AM
post90662
|
Re: issue with copying/ftp files in virtual environment
Hi Oleg,
Thanks for taking a look at this. No cannot test with VMWare
Workstation. If you can think of anything else on this just let me know.
Thank you,
Brad Anderson
-----Original Message-----
From: Oleg Bolshakov
Sent: Friday, December 16, 2011 3:07 AM
To: qnx4-community
Subject: Re: issue with copying/ftp files in virtual environment
Hi Brad,
I see nothing wrong in your QNX configuration. Unfortunately, we don't use
here
the VMware vSphere 5.0. Can you test your QNX guests with VMWare
Workstation?
--
Respectfully,
Oleg
> Hi Oleg,
>
> I have attached the files as requested---hope this helps.
>
> And the Virtual Environment we are using is VMware vSphere 5.0
>
>
> Thank you,
>
> Brad Anderson
> INTERPRO Technology, Inc.
> Office: 248-650-8695
>
>
> -----Original Message-----
> From: Oleg Bolshakov
> Sent: Wednesday, December 14, 2011 10:38 AM
> To: qnx4-community
> Subject: issue with copying/ftp files in virtual environment
>
> Hi Brad,
>
> Please, send us output of following commands (from two QNX nodes):
>
> # sin in > sin_in.txt
> # sin ar > sin_ar.txt
> # sin ver > sin_ver.txt
> # netmap > netmap.txt
> # netinfo -l > netinfo.txt
>
> What is your virtual environment?
>
> --
> Respectfully,
> Oleg
>
> > I have recently setup a virtual environment with four quest QNX 4.25 O/S
> > and
> when I am trying to copy files between NODES it errors out stating:
> >
> > cp: write (//1///[filename]): Interrupted function call
> > cp: close (//1///[filename]): Bad file descriptor
> >
> > When I FTP I get I get similiar results.....it just hangs and then
> > finally
> times out.
> >
> > Any assistance I can get to try and get this resolved would be great.
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post90575
> >
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90619
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90629
_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post90657
|
|
|
|
|
|
Brad Anderson(deleted)
|
Re: issue with copying/ftp files in virtual environment
|
|
Brad Anderson(deleted)
12/16/2011 1:49 PM
post90670
|
Re: issue with copying/ftp files in virtual environment
Oleg....
If I can asked another quick question............when I try and DITTO across
the virtual nodes I receive an error message that comes back and says "
rem_reply: sender in wrong state" and then in a few seconds says "PROC: lost
reply across net, freeing reply_blk local pid 00F6"
This is another issue I need to get resolved so not sure if both would be
related at all or not.
Let me know if you can.
Brad Anderson
-----Original Message-----
From: Brad Anderson
Sent: Friday, December 16, 2011 8:40 AM
To: qnx4-community
Subject: Re: issue with copying/ftp files in virtual environment
Hi Oleg,
Thanks for taking a look at this. No cannot test with VMWare
Workstation. If you can think of anything else on this just let me know.
Thank you,
Brad Anderson
-----Original Message-----
From: Oleg Bolshakov
Sent: Friday, December 16, 2011 3:07 AM
To: qnx4-community
Subject: Re: issue with copying/ftp files in virtual environment
Hi Brad,
I see nothing wrong in your QNX configuration. Unfortunately, we don't use
here
the VMware vSphere 5.0. Can you test your QNX guests with VMWare
Workstation?
--
Respectfully,
Oleg
> Hi Oleg,
>
> I have attached the files as requested---hope this helps.
>
> And the Virtual Environment we are using is VMware vSphere 5.0
>
>
> Thank you,
>
> Brad Anderson
> INTERPRO Technology, Inc.
> Office: 248-650-8695
>
>
> -----Original Message-----
> From: Oleg Bolshakov
> Sent: Wednesday, December 14, 2011 10:38 AM
> To: qnx4-community
> Subject: issue with copying/ftp files in virtual environment
>
> Hi Brad,
>
> Please, send us output of following commands (from two QNX nodes):
>
> # sin in > sin_in.txt
> # sin ar > sin_ar.txt
> # sin ver > sin_ver.txt
> # netmap > netmap.txt
> # netinfo -l > netinfo.txt
>
> What is your virtual environment?
>
> --
> Respectfully,
> Oleg
>
> > I have recently setup a virtual environment with four quest QNX 4.25 O/S
> > and
> when I am trying to copy files between NODES it errors out stating:
> >
> > cp: write (//1///[filename]): Interrupted function call
> > cp: close (//1///[filename]): Bad file descriptor
> >
> > When I FTP I get I get similiar results.....it just hangs and then
> > finally
> times out.
> >
> > Any assistance I can get to try and get this resolved would be great.
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post90575
> >
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90619
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post90629
_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post90657
|
|
|
|
|
|
Oleg Bolshakov
|
Re: issue with copying/ftp files in virtual environment
|
|
Oleg Bolshakov
12/19/2011 3:18 AM
post90676
|
Re: issue with copying/ftp files in virtual environment
Hi Brad,
I think that all issues depend on network.
It's only my assumption, but try to test all previous Net.e1000 drivers. The
driver was seriously updated. May be the old driver will work better on your
environment.
http://community.qnx.com/sf/frs/do/viewRelease/projects.qnx4/frs.network_drivers.net_e1000
--
Respectfully,
Oleg
> Oleg....
>
> If I can asked another quick question............when I try and DITTO across
> the virtual nodes I receive an error message that comes back and says "
> rem_reply: sender in wrong state" and then in a few seconds says "PROC: lost
> reply across net, freeing reply_blk local pid 00F6"
>
> This is another issue I need to get resolved so not sure if both would be
> related at all or not.
>
> Let me know if you can.
>
>
> Brad Anderson
>
>
> -----Original Message-----
> From: Brad Anderson
> Sent: Friday, December 16, 2011 8:40 AM
> To: qnx4-community
> Subject: Re: issue with copying/ftp files in virtual environment
>
> Hi Oleg,
>
> Thanks for taking a look at this. No cannot test with VMWare
> Workstation. If you can think of anything else on this just let me know.
>
> Thank you,
>
> Brad Anderson
>
> -----Original Message-----
> From: Oleg Bolshakov
> Sent: Friday, December 16, 2011 3:07 AM
> To: qnx4-community
> Subject: Re: issue with copying/ftp files in virtual environment
>
> Hi Brad,
>
> I see nothing wrong in your QNX configuration. Unfortunately, we don't use
> here
> the VMware vSphere 5.0. Can you test your QNX guests with VMWare
> Workstation?
>
> --
> Respectfully,
> Oleg
>
> > Hi Oleg,
> >
> > I have attached the files as requested---hope this helps.
> >
> > And the Virtual Environment we are using is VMware vSphere 5.0
> >
> >
> > Thank you,
> >
> > Brad Anderson
> > INTERPRO Technology, Inc.
> > Office: 248-650-8695
> >
> >
> > -----Original Message-----
> > From: Oleg Bolshakov
> > Sent: Wednesday, December 14, 2011 10:38 AM
> > To: qnx4-community
> > Subject: issue with copying/ftp files in virtual environment
> >
> > Hi Brad,
> >
> > Please, send us output of following commands (from two QNX nodes):
> >
> > # sin in > sin_in.txt
> > # sin ar > sin_ar.txt
> > # sin ver > sin_ver.txt
> > # netmap > netmap.txt
> > # netinfo -l > netinfo.txt
> >
> > What is your virtual environment?
> >
> > --
> > Respectfully,
> > Oleg
> >
> > > I have recently setup a virtual environment with four quest QNX 4.25 O/S
> > > and
> > when I am trying to copy files between NODES it errors out stating:
> > >
> > > cp: write (//1///[filename]): Interrupted function call
> > > cp: close (//1///[filename]): Bad file descriptor
> > >
> > > When I FTP I get I get similiar results.....it just hangs and then
> > > finally
> > times out.
> > >
> > > Any assistance I can get to try and get this resolved would be great.
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > QNX4 Community Support
> > > http://community.qnx.com/sf/go/post90575
> > >
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post90619
> >
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community...
|
|
|
|
|
|
Brad Anderson(deleted)
|
Re: issue with copying/ftp files in virtual environment
|
|
Brad Anderson(deleted)
01/03/2012 5:06 PM
post90824
|
Re: issue with copying/ftp files in virtual environment
Hi Oleg,
I have tried all previous Net.e1000 drivers and still no luck on getting
this to work-----any other ideas by anyone that I can try to getting this to
work?
Thanks......Brad
-----Original Message-----
From: Oleg Bolshakov
Sent: Monday, December 19, 2011 3:18 AM
To: qnx4-community
Subject: Re: issue with copying/ftp files in virtual environment
Hi Brad,
I think that all issues depend on network.
It's only my assumption, but try to test all previous Net.e1000 drivers. The
driver was seriously updated. May be the old driver will work better on your
environment.
http://community.qnx.com/sf/frs/do/viewRelease/projects.qnx4/frs.network_drivers.net_e1000
--
Respectfully,
Oleg
> Oleg....
>
> If I can asked another quick question............when I try and DITTO
> across
> the virtual nodes I receive an error message that comes back and says "
> rem_reply: sender in wrong state" and then in a few seconds says "PROC:
> lost
> reply across net, freeing reply_blk local pid 00F6"
>
> This is another issue I need to get resolved so not sure if both would be
> related at all or not.
>
> Let me know if you can.
>
>
> Brad Anderson
|
|
|
|
|
|
Hugh Brown
|
Re: issue with copying/ftp files in virtual environment
|
|
Hugh Brown
01/04/2012 7:45 AM
post90836
|
Re: issue with copying/ftp files in virtual environment
This sounds like something to do with your virtual environment as the
driver works just fine in a standalone environment. I run QNX4 under
VMWare Fusion on my Mac using bridged networking and it works perfectly.
The only difference is that VMWare Fusion uses the Net.ether2100 driver.
--
Hugh Brown
QNX Software Systems Limited
175 Terence Matthews Crescent,
Ottawa. ON. K2M 1W8.
Telephone: 613-591-0931
On 12-01-03 5:06 PM, "Brad Anderson" <community-noreply@qnx.com> wrote:
>Hi Oleg,
>
>I have tried all previous Net.e1000 drivers and still no luck on getting
>this to work-----any other ideas by anyone that I can try to getting this
>to
>work?
>
>Thanks......Brad
>
>-----Original Message-----
>From: Oleg Bolshakov
>Sent: Monday, December 19, 2011 3:18 AM
>To: qnx4-community
>Subject: Re: issue with copying/ftp files in virtual environment
>
>Hi Brad,
>
>I think that all issues depend on network.
>
>It's only my assumption, but try to test all previous Net.e1000 drivers.
>The
>driver was seriously updated. May be the old driver will work better on
>your
>environment.
>
>http://community.qnx.com/sf/frs/do/viewRelease/projects.qnx4/frs.network_d
>rivers.net_e1000
>
>--
>Respectfully,
>Oleg
>
>> Oleg....
>>
>> If I can asked another quick question............when I try and DITTO
>> across
>> the virtual nodes I receive an error message that comes back and says "
>> rem_reply: sender in wrong state" and then in a few seconds says "PROC:
>> lost
>> reply across net, freeing reply_blk local pid 00F6"
>>
>> This is another issue I need to get resolved so not sure if both would
>>be
>> related at all or not.
>>
>> Let me know if you can.
>>
>>
>> Brad Anderson
>
>
>
>
>_______________________________________________
>
>QNX4 Community Support
>http://community.qnx.com/sf/go/post90824
>
|
|
|
|
|
|
