foundry27 : Post

Forum Topic - Fsys.eide on INTEL SERVERBOARD S5500BC don´t work: (5 Items)

View: as

Victor Gamboa

07/22/2010 9:50 PM

post60399

Fsys.eide on INTEL SERVERBOARD S5500BC don´t work

Hi! I am installing QNX 425 on a Server with INTEL SERVERBOARD S5500BC but QNX don´t work wiht Fsys.eide. I Configured 
the BIOS to work on Legacy Mode (Compatibility MOde) but when QNX boots I get an error message: Fsys.eide Terminated ...
 Please could anyone could help me ? I thanks in advance for your help. Victor J Gamboa

Hugh Brown

07/23/2010 7:35 AM

post60410

Re: Fsys.eide on INTEL SERVERBOARD S5500BC don´t work

Have you tried Fsys.atapi?


On 10-07-22 9:50 PM, "Victor Gamboa" <community-noreply@qnx.com> wrote:

> Hi! I am installing QNX 425 on a Server with INTEL SERVERBOARD S5500BC but QNX
> don´t work wiht Fsys.eide. I Configured the BIOS to work on Legacy Mode
> (Compatibility MOde) but when QNX boots I get an error message: Fsys.eide
> Terminated ... Please could anyone could help me ? I thanks in advance for
> your help. Victor J
> Gamboa



_______________________________________________

QNX4 Community
> Support
http://community.qnx.com/sf/go/post60399


-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd.        (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Victor Gamboa

07/24/2010 9:51 AM

post60512

Re: Fsys.eide on INTEL SERVERBOARD S5500BC don´t work

I got a similar error message: /bin/Fsys.atapi terminated at .....
Any suggestions ? Thanks in advance for your help.

Hugh Brown

07/26/2010 8:06 AM

post60554

Re: Fsys.eide on INTEL SERVERBOARD S5500BC don´t work

Is Plug 'n Play turned off in the BIOS? Can you boot any O/S on this machine
and post the device ID of the IDE controller?


On 10-07-24 9:51 AM, "Victor Gamboa" <community-noreply@qnx.com> wrote:

> I got a similar error message: /bin/Fsys.atapi terminated at .....
> Any suggestions ? Thanks in advance for your help.
> 
> 
> 
> _______________________________________________
> 
> QNX4 Community Support
> http://community.qnx.com/sf/go/post60512
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd.        (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Victor Gamboa

07/29/2010 8:43 AM

post61021

Re: Fsys.eide on INTEL SERVERBOARD S5500BC don´t work

I downgraded the Motherboard BIOS´and it worked fine. It works fine with Fsys.atapi. Thanks for the help. Victor

Return

The text you entered is not a valid object ID
More Information
Object IDs begin with an object prefix and end with a number. For example, if you enter
artf2345
the application will jump directly to an artifact with the ID artf2345. Some valid object prefixes are:
artf	for an artifact
doc	for a document
page	for a project page
topc	for a discussion topic
wiki	for a wiki page