Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/PCI multi serial card for 4.23 to 4.25/List of Posts
Forum Topic - PCI multi serial card for 4.23 to 4.25: (4 Items)
   
Update
Michael O'Dor
03/21/2010 8:59 PM
post50080
PCI multi serial card for 4.23 to 4.25   
   I need to find a pci 2 port serial card that works with 4.23 along with ISA. I have tried a few but no luck. I want 
to get away from the 468 and use 586 and 686 based machines I need at least 4 working serial ports


thanks in advance
Pavol Kycina
03/22/2010 4:17 AM
post50084
Re: PCI multi serial card for 4.23 to 4.25   
> 
>    I need to find a pci 2 port serial card that works with 4.23 along with ISA
> . I have tried a few but no luck. I want to get away from the 468 and use 586 
> and 686 based machines I need at least 4 working serial ports
> 
> 
> thanks in advance


Long time ago we have used ones from MOXA. They worked fine, but usually you had to set speed 8 times lower than 
expected.

PKY
Michael O'Dor
03/22/2010 5:16 PM
post50179
RE: PCI multi serial card for 4.23 to 4.25   
Thanks for the reply, we use digi ISA 8 port cards and dumb cards, but I
have trouble with the dumb cards on new mobos and IRQ settings. Some see it
some don't. I am just starting in QNX 

Thanks

Michael O’Dor
Technical Services

Tel:         (02) 6245 6204
Fax:        (02) 6245 6242
Mob:        0409924401
Email:     michaelod@acttab.com.au
Web:       http://www.acttab.com.au 


The information transmitted is intended only for the person to whom it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, interference with, copying or other use of, or
taking of any action in reliance on this information by persons other than
the intended recipient is prohibited. If you have received this information
in error, please contact the sender immediately and delete the material from
your computer. It is the recipient’s responsibility to check this message
and any attachments for viruses.
Mario Charest
03/22/2010 5:31 PM
post50182
RE: PCI multi serial card for 4.23 to 4.25   
I am complying with the instruction and have deleted this mail from my computer.
 
> 
> 
> The information transmitted is intended only for the person to whom it
> is
> addressed and may contain confidential and/or privileged material. Any
> review, retransmission, interference with, copying or other use of, or
> taking of any action in reliance on this information by persons other
> than
> the intended recipient is prohibited. If you have received this
> information
> in error, please contact the sender immediately and delete the material
> from
> your computer. It is the recipient’s responsibility to check this
> message
> and any attachments for viruses.
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> 
> QNX4 Community Support
> http://community.qnx.com/sf/go/post50179

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems