Hi ,

I have installed QNX 6.4.0 Neutrino (self hosted). The problem I am facing is :

Whenever I open some applications , the application window's controller buttons like "close , minimize & maximise" are 
going beyond my monitor's display area. I am not understanding what might have gone wrong.

I checked my display settings & they are..

display settings :

driver :           svga
color mode :   64k
resolution :     640*480
refresh           60hz
cursor            hardware



& the output of PCI is as below :
PCI version    = 2.10

Class          = Display (VGA)
Vendor ID      = 8086h, Intel Corporation 
Device ID      = 2562h,  82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
PCI index      = 0h
PCI Mem Address = f0000000h enabled
PCI Mem Address = ffa80000h enabled
PCI Int Pin    = INT A
Interrupt line = 11
CPU Interrupt  = bh

Class          = Mass Storage (IDE)
Vendor ID      = 8086h, Intel Corporation 
Device ID      = 24cbh,  82801DB (ICH4) IDE Controller
PCI index      = 0h
PCI IO Address  = 0h enabled
PCI IO Address  = 0h enabled
PCI IO Address  = 0h enabled
PCI IO Address  = 0h enabled
PCI IO Address  = ffa0h enabled
PCI Mem Address = ffeffc00h enabled
PCI Int Pin    = INT A
Interrupt line = no connection

Class          = Multimedia (Audio)
Vendor ID      = 8086h, Intel Corporation 
Device ID      = 24c5h,  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
PCI index      = 0h
PCI IO Address  = e400h enabled
PCI IO Address  = e080h enabled
PCI Mem Address = ffa7f800h enabled
PCI Mem Address = ffa7f400h enabled
PCI Int Pin    = INT B
Interrupt line = 11
CPU Interrupt  = bh

Class          = Network (Ethernet)
Vendor ID      = 100bh, National Semiconductor Corporation 
Device ID      = 20h,  DP83815 (MacPhyter) Ethernet Controller
PCI index      = 0h
PCI IO Address  = d800h enabled
PCI Mem Address = ff8ff000h enabled
PCI Expansion ROM = ff8e0000h disabled
PCI Int Pin    = INT A
Interrupt line = 5
CPU Interrupt  = 5h


Please help me resolve this issue.

Thanks,

Satish Pattar