Project Home
Project Home
Trackers
Trackers
Documents
Documents
Wiki
Wiki
Discussion Forums
Discussions
Project Information
Project Info
Forum Topic - problem with fslSATA detecting ssd mSATA: (7 Items)
   
problem with fslSATA detecting ssd mSATA  
I'm using QNX 6.5 on an NXP single-core P1013. It has an mSATA slot. in U-Boot it successfully detects the SATA:

A21=> sata device SATA0

SATA device 0: Model: G-BONG G300 32G Firm: 20170223 Ser#: AA000000000003083320
            Type: Hard Disk
            Capacity: 30208.0 MB = 29.5 GB (61865984 x 512)
... is now current device

A21=> sata part SATA0

Partition Map for SATA device 0  --   Partition Type: DOS

Partition     Start Sector     Num Sectors     Type
    1                 2048        61859840       6

But in the OS with fslSATA after about one minute I get error. I'm using fslSATA as noted in release note for P1010-RDB 
BSP :

 devb-fslSata fslSata ioport=0xFF718000,irq=65

Error:
xpt_configure: fslSata SIM attach failure
Re: problem with fslSATA detecting ssd mSATA  
We developed our own S-ATA driver for the P1013 long time ago. I remember we had to add some settings in startup: Add 
dynamic interrupts for the S-ATA controller. Maybe that's the reason.

Regards,
Al
Re: problem with fslSATA detecting ssd mSATA  
test
Re: problem with fslSATA detecting ssd mSATA  
Hello M. Davaneh.

Please try the attached driver.

If you have still problem, please contact MEN Support in Germany (support at men.de)

Guillaume Varlet, 
Customer Support / SW developer
MEN Mikro Elektronik SAS
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard, France
www.men-france.fr
Re: problem with fslSATA detecting ssd mSATA  
attachement
Attachment: Text devb-fslSata 83.43 KB
Re: problem with fslSATA detecting ssd mSATA  
Hello Mr. Varlet,
I've tried your binary file but it gave me exact same result as before. I compared two binary files, apart from some 
info related to host machine and build date they are all the same.

Thank you for you response I'll try to contact MEN Germany.
Re: problem with fslSATA detecting ssd mSATA  
Many users may be concerned about the slow speed of writing files to the disk when copying from an external drive. 
However, the cause is not the SSD itself but its load more often than not. Often, the drive performs several tasks that 
the user may not be aware of while the computer is running. For example, I recently had a problem with fsl SATA SSD 
mSATA detection. At a glance, it is not possible to determine the cause of the SSD's slow performance. Therefore, the 
most effective method is diagnostics through testing. It is not easy for me to do it myself, so for RAID RECOVERY(https:
//www.salvagedata.com/raid-data-recovery/), I turned to a company I know.