Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/General/No output on terminal for TI Jacinto 6 EVM Board/List of Posts
Forum Topic - No output on terminal for TI Jacinto 6 EVM Board: (5 Items)
   
Update
Hubery Zhu(deleted)
02/04/2015 3:10 AM
post113209
No output on terminal for TI Jacinto 6 EVM Board   
Our components:
• Vayu EVM CPU Board
• JAMR3 Application Board
• 10.1 inch LCD/TS Daughter Board

 To boot Jacinto 6 EVM board from U-Boot:
1. Connect theJacinto 6 EVM target board to host system.
2. On host machine, start terminal program with these settings:
Baud: 115200
Bits: 8
Stop bits: 1
Parity: none
3. Connect the Jacinto 6 EVM board to the power supply, then push the PWR RESET button.

But I can't see the output from U-Boot appear on the host system console.

I have copied three files to micro SD card:
ifs-dra74x-vayu-evm.bin
MLO
u-boot.img

SYSBOOT[0:15] (SW2[1-8] SW3[1-8]) = 01100000 10000001

SW5[1:10] = 1010100000

Regards,
Hubery.
Dave Nickerson
02/04/2015 11:57 AM
post113218
Re: No output on terminal for TI Jacinto 6 EVM Board   
You must ensure that the partition on the SD card is set to "Active" and that MLO is the first file copied to the SD 
card after a fresh format of the SD Card.
Hubery Zhu(deleted)
02/04/2015 10:12 PM
post113225
Re: No output on terminal for TI Jacinto 6 EVM Board   
Hi Dave,

I can boot GLSDK u-boot with the board. But can't boot the ti-j6-dra74x_vayu-evm u-boot from QNX bsp.

Did SD card need to format two partitions? or only one active partion to load images.
one fat32 partion name "boot" another ext3/4 partition name "rootfs" .
Hubery Zhu(deleted)
02/05/2015 4:27 AM
post113228
Re: No output on terminal for TI Jacinto 6 EVM Board   
> Hi Dave,
> 
> I can boot GLSDK u-boot with the board. But can't boot the ti-j6-dra74x_vayu-
> evm u-boot from QNX bsp.
> 
> Did SD card need to format two partitions? or only one active partion to load 
> images.
> one fat32 partion name "boot" another ext3/4 partition name "rootfs" .

Have solved the problem.
Nirav Parekh(deleted)
02/24/2015 2:53 PM
post113374
Re: No output on terminal for TI Jacinto 6 EVM Board   
Are you able to use LCD with Jacinto 6 EVM?

If yes then , how ?

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems