Lakshminarayanan R
10/05/2009 9:12 AM
post39361
|
It works with client being in passive mode.
-----Original Message-----
From: Sean Boudreau [mailto:community-noreply@qnx.com]
Sent: Monday, October 05, 2009 6:30 PM
To: general-networking
Subject: Re: Problem with ftp
On Sun, Oct 04, 2009 at 11:58:59PM -0400, Lakshminarayanan R wrote:
> Hi,
>
> I'm migrating from QNX 6.4.0 to 6.4.1 and I'm held up with a problem with FTP.
>
> Earlier with QNX 6.4.0, I used to run the ftp using inetd and transfer files to QNX machine. Now, with QNX 6.4.1, I'm
not able to transfer the files using FTP.
> I get an error message "PORT ommand rejected". What could be the reason for this? Is there any change in FTP from 6.4.
0 to 6.4.1?
>
> Please shed some light on the same.
It's actually libsocket being stricter. It's fixed in the ftpd in the networking project on the foundry or you can work
around it by using passive mode in the client.
-seanb
_______________________________________________
General
http://community.qnx.com/sf/go/post39357
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
|
|
|
Lakshminarayanan R
10/05/2009 9:13 AM
post39362
|
It works with client being in passive mode. Thanks
-----Original Message-----
From: Sean Boudreau [mailto:community-noreply@qnx.com]
Sent: Monday, October 05, 2009 6:30 PM
To: general-networking
Subject: Re: Problem with ftp
On Sun, Oct 04, 2009 at 11:58:59PM -0400, Lakshminarayanan R wrote:
> Hi,
>
> I'm migrating from QNX 6.4.0 to 6.4.1 and I'm held up with a problem with FTP.
>
> Earlier with QNX 6.4.0, I used to run the ftp using inetd and transfer files to QNX machine. Now, with QNX 6.4.1, I'm
not able to transfer the files using FTP.
> I get an error message "PORT ommand rejected". What could be the reason for this? Is there any change in FTP from 6.4.
0 to 6.4.1?
>
> Please shed some light on the same.
It's actually libsocket being stricter. It's fixed in the ftpd in the networking project on the foundry or you can work
around it by using passive mode in the client.
-seanb
_______________________________________________
General
http://community.qnx.com/sf/go/post39357
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
|
|
|