srikanth chandragiri(deleted)
|
Reg: IPv6 default Gateway Issue route cmd
|
srikanth chandragiri(deleted)
05/15/2014 7:48 PM
post110365
|
Reg: IPv6 default Gateway Issue route cmd
While adding default gateway, I am facing below error
address: fda8:06c3:ce53:a890:0000:0000:0000:0001 prefixlen 64
gateway: fda8:06c3:ce53:a890:0000:0000:0000:0005
# route -v add -inet6 fda8:06c3:ce53:a890:0000:0000:0000:0005/64%tiw_sta0
so_dst: inet6 fda8:6c3:ce53:a890::5; so_mask: inet6 ffff:ffff:ffff:ffff::;
RTM_ADD: Add Route: len 120, pid 0, seq 1, errno 0, flags: <UP,GATEWAY,STATIC>
locks: inits:
sockaddrs: <DST,NETMASK>
fda8:6c3:ce53:a890::5 ffff:ffff:ffff:ffff::
route: writing to routing socket: Invalid argument
add net fda8:06c3:ce53:a890:0000:0000:0000:0005/64%tiw_sta0: Invalid argument
Could you please help in resolving this issue??
tiw_sta0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1504
address: 34:b1:f7:8c:5e:a1
media: IEEE802.11 autoselect
status: no network
inet6 fe80::cab3:73ff:fe0f:335d%tiw_sta0 prefixlen 64 scopeid 0x4
inet6 fda8:6c3:ce53:a890::1 prefixlen 64
Internet6:
Destination Gateway Flags Refs Use Mtu Interface
::1 ::1 UH 0 0 33192 lo0
fda8:6c3:ce53:a890::/64 link#4 UC 0 0 - tiw_sta0
fe80::%lo0/64 fe80::1%lo0 U 0 0 - lo0
fe80::%en0/64 link#2 UC 0 0 - en0
fe80::%tiw_sta0/64 link#4 UC 0 0 - tiw_sta0
ff01:1::/32 ::1 UC 0 0 - lo0
ff01:2::/32 link#2 UC 0 0 - en0
ff01:4::/32 link#4 UC 0 0 - tiw_sta0
ff02::%lo0/32 ::1 UC 0 0 - lo0
ff02::%en0/32 link#2 UC 0 0 - en0
ff02::%tiw_sta0/32 link#4 UC 0 0 - tiw_sta0
|
|
|