Core Development Tools/Discussion/General/How to transfer test program/files from Host to VM ware based QNX image. /List of Posts
 
Forum Topic - How to transfer test program/files from Host to VM ware based QNX image. :
   
Update
Vijay Dixit
11/29/2010 12:46 PM
post76294
How to transfer test program/files from Host to VM ware based QNX image.   
Hello,
        I have an Audio test program built using QNX momentics on my XP machine. I also have a VMware imgae of QNX 
running on the same machine. Is it possible to transfer this test program's binary and a test audio file over to the 
VMware image instance of QNX ? I would appreciate any pointers and hints on how to go about doing so. As a first step it
 be great if someone could tell me how to transfer files to the VMWare image.

Thanks,
Vijay
Elena Laskavaia
11/29/2010 1:20 PM
post76302
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Are you using IDE? There is 10 Steps guide that describe how to write simple program and launch it using IDE.
If you don't want to use IDE for some reason you can used ftp, scp, etc.


On 29/11/10 12:46 PM, Vijay Dixit wrote:
> Hello,
>         I have an Audio test program built using QNX momentics on my XP machine. I also have a VMware imgae of QNX 
running on the same machine. Is it possible to transfer this test program's binary and a test audio file over to the 
VMware image instance of QNX ? I would appreciate any pointers and hints on how to go about doing so. As a first step it
 be great if someone could tell me how to transfer files to the VMWare image.
> 
> Thanks,
> Vijay
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post76294
>
Vijay Dixit
11/29/2010 2:32 PM
post76320
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Yes I am using the IDE, how may I go about using SCP/FTP from XP ? Any specific software/driver to be installed on the 
QNX side ?
Elena Laskavaia
11/29/2010 2:37 PM
post76321
Re: How to transfer test program/files from Host to VM ware based QNX image.   
If you using IDE you have to read the guide (at least 10 steps one!). You just launch the application - it will transfer
 all files for you. Also you can use Target File System Natigator view
to drag and drop files between host & target.

On 29/11/10 02:32 PM, Vijay Dixit wrote:
> Yes I am using the IDE, how may I go about using SCP/FTP from XP ? Any specific 
software/driver to be installed on the QNX side ?
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post76320
>
Vijay Dixit
11/29/2010 2:52 PM
post76323
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Hello Elena,
                Thanks for the hint. But after spending a while with the IDE am unable to exactly find, how to bring up 
the drag and drop feature from within the IDE ?

Thanks,
Vijay
Elena Laskavaia
11/29/2010 2:58 PM
post76324
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Did you read 10 Steps guide?
http://www.qnx.com/developers/docs/6.5.0/index.jsp?topic=/com.qnx.doc.momentics_quickstart/about.html


On 29/11/10 02:52 PM, Vijay Dixit wrote:
> Hello Elena,
>                 Thanks for the hint. But after spending a while with the IDE am unable to exactly find, how to bring 
up the drag and drop feature from within the IDE ?
> 
> Thanks,
> Vijay
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post76323
>
Vijay Dixit
11/29/2010 3:52 PM
post76344
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Elena, thanks a lot for the above link. That certainly helps. Will give it a try.

Thanks,
Vijay
Vijay Dixit
11/29/2010 5:18 PM
post76365
Re: How to transfer test program/files from Host to VM ware based QNX image.   
Elena,
           I am using the QNX momentics suite downloaded from here:

http://www.qnx.com/products/evaluation/

I am unable to find a way to add the QNX Audio library to build my program, as described in the link above. The IDE that
 I have is quite different from the one being used in the article. I seem to have a newer one. Any hints on how I may 
add a shared library to build my project ?

Thanks,
Vijay
Vijay Dixit
11/29/2010 6:06 PM
post76373
Re: How to transfer test program/files from Host to VM ware based QNX image.   
I had to create a QNX-C project and that resolved it.

Return