TeamForge : Post

Forum Topic - Something besides ped?:

View: as

Matthew Phillips

04/21/2009 1:27 PM

post27654

Hello,

I'm running QNX 6.2 and ped seems unable to read files generated from  
other text editors, specifically jed--I get 'encoding errors' no  
matter what encoding I try.  The files I'm trying to read are standard  
text files as far as I know, fully grep-able etc.  Is there another  
graphical text editor? (Something like gedit, TextWrangler, AnyEdit,  
or what ped is intended to be, etc.)  Thanks--

Matt

Weijie Zhang(deleted)

04/21/2009 1:31 PM

post27656

RE: Something besides ped?

Could your file be something like Microsoft text (where the ^M at end of
each line)? For example, the file is edited by a text editor and saved
in a windows box and then you transfered it onto nto.  

You may try to run on nto "textto your_file" to make it clean and see
what happens then. 

Thanks
Weijie


-----Original Message-----
From: Matthew Phillips [mailto:community-noreply@qnx.com] 
Sent: April 21, 2009 1:27 PM
To: general-community
Subject: Something besides ped?

Hello,

I'm running QNX 6.2 and ped seems unable to read files generated from  
other text editors, specifically jed--I get 'encoding errors' no  
matter what encoding I try.  The files I'm trying to read are standard  
text files as far as I know, fully grep-able etc.  Is there another  
graphical text editor? (Something like gedit, TextWrangler, AnyEdit,  
or what ped is intended to be, etc.)  Thanks--

Matt


      

_______________________________________________
General
http://community.qnx.com/sf/go/post27654

Mario Charest

04/21/2009 1:33 PM

post27658

RE: Something besides ped?

Isn't ped UTF8?  May not like file that have non UTF8 data?

> -----Original Message-----
> From: Weijie Zhang [mailto:community-noreply@qnx.com]
> Sent: April-21-09 1:32 PM
> To: general-community
> Subject: RE: Something besides ped?
> 
> Could your file be something like Microsoft text (where the ^M at end
> of
> each line)? For example, the file is edited by a text editor and saved
> in a windows box and then you transfered it onto nto.
> 
> You may try to run on nto "textto your_file" to make it clean and see
> what happens then.
> 
> Thanks
> Weijie
> 
> 
> -----Original Message-----
> From: Matthew Phillips [mailto:community-noreply@qnx.com]
> Sent: April 21, 2009 1:27 PM
> To: general-community
> Subject: Something besides ped?
> 
> Hello,
> 
> I'm running QNX 6.2 and ped seems unable to read files generated from
> other text editors, specifically jed--I get 'encoding errors' no
> matter what encoding I try.  The files I'm trying to read are standard
> text files as far as I know, fully grep-able etc.  Is there another
> graphical text editor? (Something like gedit, TextWrangler, AnyEdit,
> or what ped is intended to be, etc.)  Thanks--
> 
> Matt
> 
> 
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27654
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27656
>

Weijie Zhang(deleted)

04/21/2009 1:52 PM

post27662

RE: Something besides ped?

Maybe but seems not really. Don't know the ped on 6.2, but I just wrote
and saved/read out a line of Chinese on ped on 6.4.

Why not vi ;-)). 

Thanks
Weijie


-----Original Message-----
From: Mario Charest [mailto:community-noreply@qnx.com] 
Sent: April 21, 2009 1:34 PM
To: general-community
Subject: RE: Something besides ped?

Isn't ped UTF8?  May not like file that have non UTF8 data?

> -----Original Message-----
> From: Weijie Zhang [mailto:community-noreply@qnx.com]
> Sent: April-21-09 1:32 PM
> To: general-community
> Subject: RE: Something besides ped?
> 
> Could your file be something like Microsoft text (where the ^M at end
> of
> each line)? For example, the file is edited by a text editor and saved
> in a windows box and then you transfered it onto nto.
> 
> You may try to run on nto "textto your_file" to make it clean and see
> what happens then.
> 
> Thanks
> Weijie
> 
> 
> -----Original Message-----
> From: Matthew Phillips [mailto:community-noreply@qnx.com]
> Sent: April 21, 2009 1:27 PM
> To: general-community
> Subject: Something besides ped?
> 
> Hello,
> 
> I'm running QNX 6.2 and ped seems unable to read files generated from
> other text editors, specifically jed--I get 'encoding errors' no
> matter what encoding I try.  The files I'm trying to read are standard
> text files as far as I know, fully grep-able etc.  Is there another
> graphical text editor? (Something like gedit, TextWrangler, AnyEdit,
> or what ped is intended to be, etc.)  Thanks--
> 
> Matt
> 
> 
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27654
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27656
> 


_______________________________________________
General
http://community.qnx.com/sf/go/post27658

Mario Charest

04/21/2009 2:05 PM

post27664

RE: Something besides ped?


> -----Original Message-----
> From: Weijie Zhang [mailto:community-noreply@qnx.com]
> Sent: April-21-09 1:52 PM
> To: general-community
> Subject: RE: Something besides ped?
> 
> Maybe but seems not really. Don't know the ped on 6.2, but I just wrote
> and saved/read out a line of Chinese on ped on 6.4.
> 
> Why not vi ;-)).

He said graphical editor.  Maybe gvim is available for 6.2?  Workspace maybe?

> 
> Thanks
> Weijie
> 
> 
> -----Original Message-----
> From: Mario Charest [mailto:community-noreply@qnx.com]
> Sent: April 21, 2009 1:34 PM
> To: general-community
> Subject: RE: Something besides ped?
> 
> Isn't ped UTF8?  May not like file that have non UTF8 data?
> 
> > -----Original Message-----
> > From: Weijie Zhang [mailto:community-noreply@qnx.com]
> > Sent: April-21-09 1:32 PM
> > To: general-community
> > Subject: RE: Something besides ped?
> >
> > Could your file be something like Microsoft text (where the ^M at end
> > of
> > each line)? For example, the file is edited by a text editor and
> saved
> > in a windows box and then you transfered it onto nto.
> >
> > You may try to run on nto "textto your_file" to make it clean and see
> > what happens then.
> >
> > Thanks
> > Weijie
> >
> >
> > -----Original Message-----
> > From: Matthew Phillips [mailto:community-noreply@qnx.com]
> > Sent: April 21, 2009 1:27 PM
> > To: general-community
> > Subject: Something besides ped?
> >
> > Hello,
> >
> > I'm running QNX 6.2 and ped seems unable to read files generated from
> > other text editors, specifically jed--I get 'encoding errors' no
> > matter what encoding I try.  The files I'm trying to read are
> standard
> > text files as far as I know, fully grep-able etc.  Is there another
> > graphical text editor? (Something like gedit, TextWrangler, AnyEdit,
> > or what ped is intended to be, etc.)  Thanks--
> >
> > Matt
> >
> >
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post27654
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post27656
> >
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27658
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post27662
>

Return